1. Tuyển Mod quản lý diễn đàn. Các thành viên xem chi tiết tại đây

Nghiên cứu học hỏi cập nhật trao đổi sưu tầm thông tin..kỹ thuật PCP nước ngoài

Chủ đề trong 'Kỹ thuật quân sự nước ngoài' bởi NhatKiemThien, 29/08/2014.

Trạng thái chủ đề:
Đã khóa
  1. 1 người đang xem box này (Thành viên: 0, Khách: 1)
  1. satthu47

    satthu47 Thành viên gắn bó với ttvnol.com

    Tham gia ngày:
    09/10/2012
    Bài viết:
    394
    Đã được thích:
    800
    Ngồi buồn up hình chơi ^^
    [​IMG]
    trucza, vankiemsau2vngarunghue thích bài này.
  2. ngocanh21

    ngocanh21 Thành viên rất tích cực

    Tham gia ngày:
    06/07/2012
    Bài viết:
    452
    Đã được thích:
    247
    gần tết rồi không co ai ta họp ăn tất niên gặp mặt chút các bac nhỉ
  3. lovesunghoicrazy

    lovesunghoicrazy Thành viên gắn bó với ttvnol.com

    Tham gia ngày:
    19/04/2012
    Bài viết:
    491
    Đã được thích:
    1.426
    Nghe thiên hạ đồn có vài ae SG nào đó tất niên hoành tráng cả ngày hôm nay và kéo dài cho đến tận ngày mai luôn hay sao ah.

    Ae SG ai máu thì tham gia cho vui...củi lửa dẹp hết, tất niên có món gì đó rất mới-độc-lạ...

    Tiếc là ko tham gia và chiến với ae tới cùng được...thôi thì dịp tới vậy. ( mà giờ tới 30 tết còn lâu, chắc kêu gọi ae tất niên lần nữa quóa....keke..)

    Nhà này giờ vắng tanh nhỉ, ae viết vài câu kết lại cho năm cũ đi...

    Còn mình đang phấn đấu sang năm cưới vợ nên sẽ chia tay củi lửa 1 thời gian...chờ con nó lớn lên rồi tính tiếp vậy.

    ..
    nguyen137, trucza, dlink6 người khác thích bài này.
  4. phong22111991

    phong22111991 Thành viên tích cực

    Tham gia ngày:
    13/08/2014
    Bài viết:
    97
    Đã được thích:
    79
    OTE="satthu47, post: 23969549, member: 556373"]Mình cần thanh lý 1 cây pcp ed chế, cành weihrauch 5.5 20", kính tasco 2.5 - 10 x 42, giá 13,5 củ.
    Bác nào cần pm nhé![/QUOTE]
    @@
    dungtuyenquang thích bài này.
  5. lovesunghoicrazy

    lovesunghoicrazy Thành viên gắn bó với ttvnol.com

    Tham gia ngày:
    19/04/2012
    Bài viết:
    491
    Đã được thích:
    1.426
    Ngồi nghịch nghịch net tìm được cái này...
    Thấy có vẻ hay hay mà ko biết in-lít nên nhờ ae dịch giúp.

    Over the last year we had a lot of research. Including the barrels, the benefit of our close cooperation with the German company Lothar Walther allows us to not just buy media gross barrels, and ordered their blanks, what we want. During the year we "played" with a twist, internal diameters, grooves, finally, the material stems. Made to certain requirements for the R3, LW will now send blanks they make to our specifications.
    I thank Gerd Walter, who when our conversation on IWA 2010 exhibition, though perplexed about "Why do you need all these different twists, pressure and so on, because everything is already invented and tested?" However, he did what we requested, including all new tools for the manufacture of our barrels.
    It is clear that this is not easy and not cheap, but they "give" the results of which are paid for.
    It's one thing just to buy media gross barrels and quite another to make barrels to specific order. The price of our Lothar Walther barrel is 100% higher than of the price of the gross manufactured pig.
    Now we even have the thread, chamfer and crown made at the factory LW. Everything is done at the LW factory, including polished internal bore, on manufacturing premium blanks.

    Regarding the inner surface of the barrel, I must admit that we had to pay a little attention to it, it was necessary to periodically clean the barrel, and should be.
    The new R3 bores are significantly smoother putting more dependence on accuracy.
    On the older std L/W bores it was more noticeable with a dirty barrel, with just a few hundred rounds you could scrape up a lot of lead out of the barrel, literally scales settled on a patch, and now, after two and a half thousand shots a patch comes out slightly darkened, but scales of lead is out of the question.

    The old gross manufactured barrel bore "cross cut". Note the rough chatter grooves
    and rough dragged un-polished steel from the older tooling of the manufacturing process ..

    [​IMG]


    The new R3 Spec custom L/W barrel cross cut. It is easy to see where the long range accuracy begins...

    [​IMG]

    This gives the user what he needs most - stability result of fire.
    In ad***ion, we have moved on to the threading the barrel to the breach, which in a positive way affected the bore, the bore deformed less than it was before. The threaded breach end area of the bore is opened up for the bolt probe and pellet leaving the entire length of the bore unaffected by clamping.
    The Matador R 2.5 barrel could be clamped up too tight making a "choking" effect in two places where the barrel mounts clamp up in the centre section of the barrel.
    Speaking of barrels and shooting results, it would be wrong to ignore the important question of how to weaponize the R3.
    For today, in my opinion, only JSB pellets provide the necessary accuracy and stability of our shooting. Of course some people may say that I am speaking only for the reason that I have the exclusive rights to sell JSB pellets in Russia, but if you approach the situation from the other side - what I had to do to receive this exclusive right, why would I push this product if I was not sure about the quality of products JSB? I work with JSB pellets more than five years, I know well the business owners in the Czech Republic, I have testing with their bullets not just a business relationship, we are friends. And that's the reason that I know these bullets, I know how they are made, I know people who make them, I know their attitude to what they do. Therefore, all of the experiments we carried out on my barrels were with these pellets and I set up the products under these pellets.


    ...

    While I don't know Eds exact barrel specifics I will give you my test results which others found similar and thus why the recommended 880-890 Fps range.
    To date I have close to 140k pellets through my 22 ( still original orings FYI). Over 100k were with JSB 18s then after getting 25 cal I detuned the 22 cal to 20fpfe with JSB 13s for field target.
    I shoot the 25 mostly nowadays since moving to Montana( hunting , appx 100k pellets ) as they don't have local Field Target club here. I'll reset the 22 back to using the 18s
    But back to the story.
    When I first got the 22 a few years ago I went through my OCD phase to optimize it. Broke it in well first .
    Reg tuning, trigger polish,several hundred crony strings, etc.
    I sorted the JSB 18s by head size into 4 groups (5.50, 5.51, 5.52, 5.53 ) and then subsorted by weight to within 1/10 grain of 18.13 grains.
    I saw as much as 1 grain difference between lightest to heaviest pellet in numerous tins with .30 ish grain being normal variance from lightest to heaviest from 18.13 baseline standard.
    Had a machinist friend make me a stainless bar with 4 precise holes to check head size quickly.
    Each group chronied for tightest run then shot at 100 yards. Rinse and repeat.
    Group after group after group tested at various speeds to find its destabilizing point.
    The best fitting head diameter to barrel pellets could achieve MOA consistenlty at 1000 Fps.
    The poorest fitting pellet group would achieve MOA consistently around 885 Fps.
    My conclusion and recommendation after sorting and testing some 50k pellets with appx 12k making it into final 4 test groups is to set the rifle between 880-890 and shoot whatever JSB 18s are in the tin. You will get MOA groups ( 5 shots ) often and the majority will be just slightly bigger with an occasional baby flyer but Golf Ball groups at 100 will be normal.
    If you are shooting competition and need the best accuracy by all means measure and weigh to find those 5.50-5.51 heads as close to 18.13 grains and set around 910-920 Fps. Buy 10k pellets and you'll probably get 1500 that match your specs. Sell the rest and buy another batch to sort. Repeat. But if your a plinker/Hunter and can be happy with just a bit bigger than MOA with any JSB 18 from the tin then set to 880ish and have fun. Save yourself the time and expense of sorting.
    If you want more power do what I did and get a 25 cal.
    JSB 25s at 940 Fps gives MOA all day.
    ..

    All tests were with my Edgun 22 long.
    As I said earlier, if you want to increase speed above 880 Fps for the JSB 18 and still get regular MOA groups at 100 or farther you will need to have more matched pellets to your barrel. The higher speeds start to really show the pellets inconsistencies at around 100 and beyond. A simple test is tune it up to 950 Fps or higher. Set up a 3 foot black face target at 100. Have sun directly behind you so it lights up the pellet skirts as it approaches target. Shoot 50 random pellets ( obviously no damaged skirts or nicked up heads). You will see through the scope how many start wobbling and corkscrewing around 75-80 yds ( I would bet 25% wobble easily if not higher ). Back gun down to 880fps and repeat test and you might see just a few wobble.
    Myself and many others have already done the exhaustive leg work on this matter.
    I believe Eds pellets are a more matched set of JSB pellets for his barrel specs thus being able to be shot at the higher speed accurately.
    As for me I personally would rather be able to shoot any JSB 18 of any size head at 885 Fps and sort out a couple thousand preferred pellets for benchrest matches. The difference in power gained is minimal not to mention reduced shot count.
    At 885 Fps I would get appx 115 regulated shots with 9 Fps max spread and 2.3 Fps standard deviation in my long version.
    If you're only shooting out to 70 yds you can probably get away with 940 Fps and most any JSB 18 pellet with very acceptable accuracy.
    But if you want to start stretching it out to 100 and farther then slow it down unless you want to sort or buy Eds premium pellets
    ..

    danghem, truczadlink thích bài này.
  6. phong22111991

    phong22111991 Thành viên tích cực

    Tham gia ngày:
    13/08/2014
    Bài viết:
    97
    Đã được thích:
    79
    Các nhà mình có ai ngâm ruượ bìm bịp bịp chưa bác nào ngâm rồi hướng dẫn e cái .thanks cả nhà :)
  7. kuteokute07

    kuteokute07 Thành viên rất tích cực

    Tham gia ngày:
    13/11/2014
    Bài viết:
    129
    Đã được thích:
    159
    để kả lông moi bỏ ruột
    rửa lại bằng rựu 45 xog oy bỏ vô ngâm thôi
    trucza, phong22111991tungbiker thích bài này.
  8. thich che

    thich che Thành viên gắn bó với ttvnol.com

    Tham gia ngày:
    01/06/2014
    Bài viết:
    177
    Đã được thích:
    438
    em làm thế này bác tham khảo thử nha.
    1. bìm bịp nhổ sạch lông có thể thui sơ qua hoặc khỏi thui
    2. mổ lổ nhỏ sau đích moi hết bộ lòng "mấy người ngâm thuê còn khoét mắt nữa nhưng ko biết tại sau"
    3. rửa sạch máu, nhớt ..... bằng rượu mạnh từ 1 -> 2 lần sau đó để ráo
    4. chuẩn bị hủ ngâm bỏ bìm bịp và đổ rượu mạnh vào ngâm 3 ->5 ngày đổ ra bỏ nước đó " nước đầu thường có nhiều chất bẩn"
    5. đổ rượu mới vào ngâm " xong chờ ngày uống"
    Chú ý:
    - bìm bịp ko nên để lông ngâm vì rất là zơ, muốn để lông phải rửa qua nhiều lần bằng rượu mạnh nên rất tốn rượu nên bỏ quách cái lông cho xong.
    - không nên để nguyên bộ lòng ngâm zì, bìm bịp ai biết nó ăn thứ j nhưng toàn thấy ăn sâu, ốc ...... gớm quá ko ai muốn uống nó zô bụng nên bỏ quách luôn, muốn để bộ lòng ngâm luôn phải bỏ đói con bìm bịp cả tuần hoặc hơn để nó ị ra hết những thứ trong bụng nó ra nhưng trước đó phải cho nó ăn toàn rắn, bọ cạp.... zậy mới ngon
    - nhớ rửa phải bằng rượu zì rửa bằng nước xong cái bình rượu nó thúi ình
    - nhớ rửa bỏ sạch máu để máu nó ngâm hủ rượu tanh rình
    - đè con bìm bịp ngập trong rượu nếu ko nó củng thúi ình
    "rượu ngâm thành công có màu đẹp, thơm...."
    chúc bác thành công.
    :-c:drm1:drm1:drm:drm:drm:drm:drm:drm
  9. xathubacgiang

    xathubacgiang Thành viên mới

    Tham gia ngày:
    15/01/2015
    Bài viết:
    18
    Đã được thích:
    6
    Bác mới chơi pcp a
    Ansino, tungbikerjuniosang thích bài này.
  10. satthugunmu

    satthugunmu Thành viên gắn bó với ttvnol.com

    Tham gia ngày:
    04/03/2014
    Bài viết:
    154
    Đã được thích:
    301
    cái gì cũng "ình" được hết vậy?em thấy bìm bịp mà bắn chết thì nên làm thịt ăn cho rồi.muốn ngâm để lấy chất thì tốt nhất là tìm con non rồi bẻ giò nó.con mẹ sẽ tìm thuốc về bó bột cho con nên mói có vị thuốc :-)
Trạng thái chủ đề:
Đã khóa

Chia sẻ trang này