Tài liệu IEEE(đọc kỹ bài đầu tiên trước khi gửi yêu cầu)

@boyhen, vuuvuu, chientq: đã có tài liệu cho mọi người.
Chientq chú ý post đúng tên tài liệu nhé. "Hydroelectric" but not "Hydroelectrical"
Gudluck all!
nghichnham

Chào Pác lâu quá không gặp pác, em nhờ pác load hộ em một số tài liệu về thí nghiệm MBA:
1. Utilizing the transfer function in transformer testing, Swanevelder, P.; Hancke, G.P.; 10-12 May 1994 Page(s):1168 - 1170 vol.3
2. Transformer Fault Diagnosis Based on Naive Bayesian Classifier and SVR, Yong-li, Zhu; fang, Wang; Lan-qin, Geng; Nov. 2006 Page(s):1 - 4
3. Transformer testing using circuit analysis techniques, Penrose, H.W.; 16-18 Oct. 2001 Page(s):639 - 641
4. Interpretation of Partial Discharge Quantities as Measured at the Terminals of HV Power Transformers; James, R. E.; Trick, F. E.; Phung, B. T.; White, P. A.; Volume EI-21, Issue 4, Aug. 1986 Page(s):629 - 638
5. Enabling 11/500 kV test transformer for 11 kV equipment testing; Muhammad Amin; Volume 2, 5-9 June 2005 Page(s):429 - 430 Vol. 2
6. IEEE standard test code for liquid-immersed distribution, power, and regulating transformers; 30 Dec. 1999
7. IEEE standard conformance test procedures for instrument transformers; July 1992
8. IEEE recommended practice for the detection of partial discharge and the measurement of apparent charge in dry -type transformers; July 1992
9. IEEE standard for transformers - underground-type, self-cooled, single-phase distribution transformers with separable, insulated, high-voltage connectors; high voltage (24 940 GrdY/14 400 V and below) and low voltage (240/120 V, 167 kVA and smaller); March 1992
10. Evaluation of breakdown characteristics of oil-immersed transformers under non-standard lightning impulse - insulation characteristics for non-standard lightning impulse waveforms with oscillations; Okabe, S.; Volume 14, Issue 3, June 2007 Page(s):679 - 688
11. Analysis of Very Fast Transients in Layer-Type Transformer Windings; Popov, M.; van der Sluis, L.; Smeets, R.P.P.; Roldan, J.L.; Volume 22, Issue 1, Jan. 2007 Page(s):238 - 247
12. Parameter determination for modeling system transients-Part III: Transformers; Martinez, J.A.; Walling, R.; Mork, B.A.; Martin-Arnedo, J.; Durbak, D.; Volume 20, Issue 3, July 2005 Page(s):2051 - 2062
13. Temperature responses to step changes in the load current of power transformers; Nordman, H.; Rafsback, N.; Susa, D.; Volume 18, Issue 4, Oct. 2003 Page(s):1110 - 1117
14. Experience with return voltage measurements for assessing insulation con***ions in service-aged transformers;
Saha, T.K.; Zheng Tong Yao; Volume 18, Issue 1, Jan 2003 Page(s):128 - 135
15. Thermal overload tests on a 400-MVA power transformer with a special 2.5-p.u. Short time loading capability; Nordman, H.; Lahtinen, M.; Volume 18, Issue 1, Jan 2003 Page(s):107 - 112
Thanks Pác nhiều nhiều!!!!

Ồ! Nhanh thật! Cảm ơn nhiệt tình của bác nghichnham nhé. Lại còn sửa lỗi giùm nữa chứ. Mình copy & paste từ forum khác nên bị sai.
Ngòai IEEE ra, bác còn có thể down được từ IEC được không?

Nhờ bạn download dùm mình các tài liệu này
1. Yamamura, N.; Ishida, M.; Hori, T.;"A simple wind power generating system with permanent magnet type synchronous generator," Power Electronics and Drive Systems, 1999. PEDS ''99. Proceedings of the IEEE 1999 International Conference on Volume 2, 27-29 July 1999 Page(s):849 -854 vol.2

2.Marini, M.; Massardo, A.; Satta, A.; Zamparo, G.;"Theoretical aerodynamic methods for VAWT analysis"; Energy Conversion Engineering Conference, 1989. IECEC-89. Proceedings of the 24th Intersociety
6-11 Aug. 1989 Page(s):2021 - 2027 vol.4
3. Shikha; Bhatti, T.S.; Kothari, D.P.;"A new vertical axis wind rotor using convergent nozzles";Power Engineering, 2003 Large Engineering Systems Conference on 7-9 May 2003 Page(s):177 - 181
4. Kosaku, T.; Sano, M.; Nakatani, K.;"Optimum pitch control for variable-pitch vertical-axis wind turbines by a single stage model on the momentum theory"; Systems, Man and Cybernetics, 2002 IEEE International Conference on
Volume 5, 6-9 Oct. 2002 Page(s):6 pp. vol.5
5. Lefebvre, S.; Dessaint, L.; Dubg, B.; Nakra, H.; Pgrocheau, A.;" Simulator Study of a Vertical Axis Wind Turbine Generator Connected to a Small Hydro Network" ; IEEE Transactions on Power Apparatus and Systems
Volume PAS-104, Issue 5, May 1985 Page(s):1095 - 1101
6.Dunnett, S.; Piggott, H.;" Axial airgap machines for small wind generators in developing countries";Axial Airgap Machines (Ref. No. 2001/157), IEE Seminar on 2 May 2001 Page(s):4/1 - 4/6
7. Stannard, N.; Bumby, J.R.;"Performance aspects of mains connected small-scale wind turbines";Generation, Transmission & Distribution, IET
Volume 1, Issue 2, March 2007 Page(s):348 - 356

Pác down nốt giùm em một số std này nhé:
1. IEEE Std C57.12.00-1993, IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers.
2. IEEE Std C57.12.01-1989 (Withdrawn), IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin-Encapsulated Windings.
3. IEEE Std C57.12.56-1986 (Reaff 1993), IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers.
4. IEEE Std C57.12.90-1993, IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers and IEEE Guide for Short-Circuit Testing of Distribution and Power Transformers.
5. IEEE Std C57.12.91-1995, IEEE Test Code for Dry-Type Distribution and Power Transformers.
6. IEEE Std C57.92-1981 (Reaff 1991), IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers up to and Including 100 MVA with 55 C or 65 C Average Winding Rise.
7. IEEE Std C57.94-1982 (Reaff 1987), IEEE Recommended Practice for Installation, Application, Operation,and Maintenance of Dry-Type General Purpose Distribution and Power Transformers.
8. IEEE Std C57.98-1993, IEEE Guide for Transformer Impulse Tests.
9. IEEE Std 799-1987 (Reaff 1992), IEEE Guide for Handling and Disposal of Transformer Grade Insulating Liquids Containing PCBs.
10. IEEE Std C57.106-1991 (Withdrawn), IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment.
11. IEEE Std 1-1986 (Reaff 1992), IEEE Standard General Principles for Temperature Limits in the Rating of Electric Equipment and for the Evaluation of Electrical Insulation.
12. IEEE Std 4-1995, IEEE Standard Techniques for High-Voltage Testing.
13. IEEE Std 62-1995, IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus?"Part 1il Filled Power Transformers, Regulators, and Reactors.
14.IEEE Std 522-1992, IEEE Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines.
15.IEEE Std 943-1986 (Reaff 1992), IEEE Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation Systems.
16.IEEE Std C37.011-1994, IEEE Application Guide for Transient Recovery Voltage for AC High- Voltage Circuit Breakers Rated on a Symmetrical Current Basis.
17.IEEE Std C37.013-1997, IEEE Standard for AC High-Voltage Generator Circuit Breaker Rated on a Symmetrical Current Basis.
18. IEEE Std C37.13-1990 (Reaff 1995), IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures.
19. IEEE Std C37.14-1992, IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures.
20. IEEE Std C37.20.1-1993 (Reaff 1998), IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear.
21. IEEE Std C37.20.2-1993, IEEE Standard for Metal-Clad and Station-Type Cubicle Switchgear.
22.IEEE Std 81.2-1991, IEEE Guide for Measurement of Impedance and Safety Characteristics of Large, Extended or Interconnected Grounding Systems (Part 2).
23. IEEE Std 142-1991, IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems.
24. IEEE Std 367-1996, IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault.
25. IEEE Std 665-1995, IEEE Guide for Generating Station Grounding.
26. IEEE Std 1050-1996, IEEE Guide for Instrumentation and Control Grounding in Generating Stations.
Em nhờ nhiều , ngại quá mong pác thông cảm!!
Thanks Pác!!
Được slave2005 sửa chữa / chuyển vào 14:14 ngày 12/10/2007

@slave2005: đã có 15 tài liệu đầu cho bạn
@chientq: hiện tại mình chỉ down từ một nguồn là ieee thôi vì thực sự sẽ mất rất nhiều thời gian nếu đi tìm ở nhiều nguồn khác.
Thân
NghichNham

Hi nghichnham, nhờ bạn down dùm một số tài liệu sau:
1- The instantaneous power theory on the rotating p-q-r reference frames, Hyosung Kim; Akagi, H.;
http://ieeexplore.ieee.org/iel5/6444/17234/00794600.pdf?tp=&arnumber=794600&isnumber=17234
2- A quasi-instantaneous reactive power compensator for unbalanced and non-sinusoidal three-phase systems
Nabae, A.; Tanaka, T.;
http://ieeexplore.ieee.org/iel4/5671/15202/00701994.pdf?tp=&arnumber=701994&isnumber=15202
3- Unification and Evaluation of the Instantaneous Reactive Power Theories, Seong-Jeub Jeon;
http://ieeexplore.ieee.org/iel5/11209/36090/01712055.pdf?tp=&arnumber=1712055&isnumber=36090
4- On some misinterpretations of the instantaneous reactive power p-q theory, Czarnecki, L.S.;
http://ieeexplore.ieee.org/iel5/63/28833/01296759.pdf?tp=&arnumber=1296759&isnumber=28833
5- A study on the theory of instantaneous reactive power
Furuhashi, T.; Okuma, S.; Uchikawa, Y.;
http://ieeexplore.ieee.org/iel1/41/1731/00045848.pdf?tp=&arnumber=45848&isnumber=1731
6- Does zero instantaneous reactive power guarantee zero reactive power under asymmetric voltage con***ion?, Seong-Jeub Jeon; Lee, F.C.;
http://ieeexplore.ieee.org/iel5/9792/30878/01431820.pdf?tp=&arnumber=1431820&isnumber=30878
7- Modeling and analysis of instantaneous active and reactive power for PWM AC/DC converter under generalized unbalanced network, Yongsug Suh; Lipo, T.A.;
http://ieeexplore.ieee.org/iel5/61/34480/01645197.pdf?tp=&arnumber=1645197&isnumber=34480
8- Digital control circuit for active power filter with modified instantaneous reactive power control algorithm
Sozanski, K.; Strzelecki, R.; Kempski, A.;
http://ieeexplore.ieee.org/iel5/7959/22002/01022591.pdf?tp=&arnumber=1022591&isnumber=22002
9- Distorted and unbalanced systems compensation within instantaneous reactive power framework, Salmeron, P.; Herrera, R.S.;
http://ieeexplore.ieee.org/iel5/61/34480/01645214.pdf?tp=&arnumber=1645214&isnumber=34480
10- Harmonic and reactive power compensation based on the generalized instantaneous reactive power theory for three-phase four-wire systems, Fang Zheng Peng; Ott, G.W., Jr.; Adams, D.J.;
http://ieeexplore.ieee.org/iel4/63/15700/00728344.pdf?tp=&arnumber=728344&isnumber=15700
11- A new approach to individual-phase reactive power compensator for nonsinusoidal and unbalanced three-phase systems-proposal for a quasi-instantaneous reactive power compensator, Nabae, A.; Tanaka, T.;
http://ieeexplore.ieee.org/iel4/6146/16439/00759965.pdf?tp=&arnumber=759965&isnumber=16439
12- Spectral analysis of instantaneous powers in single-phase and three-phase systems with use of p-q-r theory, Hyosung Kim; Blaabjerg, F.; Bak-Jensen, B.;
http://ieeexplore.ieee.org/iel5/7571/20624/00953994.pdf?tp=&arnumber=953994&isnumber=20624
thanks nghichnham

@lethang85: Khi nào vụ CNC thành công thì nhớ cho nghichnham uống bia nhé
@anhkhoa79: Đã có tài liệu cho bạn rồi.
Thân
nghichnham

Đề tài của em bắt đầu từ đầu năm nay và kết thúc vào cuối năm. Bây giờ đã làm xong phần để báo cáo OK rồi, còn phần nghiên cứu kia là phần mở rộng, khi nào bảo vệ xong sẽ phone cho bác( bác gửi cho em số ĐT), nếu bác ở HN bác nhớ đi cùng với anh em nhé.

Chào bác nghicnham,
Em đang cần 1 article sau, bác giúp em nhé!
1. Harmonic filter design and power factor correction in a cementfactory - Turkay, B.
http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=964642