Công nghệ màng (membrane)

Công nghệ màng (membrane)

Tôi đang làm đề tài nghiên cứu về màng lọc ứng dụng trong lọc dầu, có bạn nào quan tâm, cần trao đổi tài liệu thì liên lạc nhé
minhquan13683@gmail.com

Chào bạn ! may mắn quá ! mãi hôm nay mới có người lập topic này,tui cũng đang quan tâm đến nó đây.Tui mơi chỉ mới nghe đến Zeolit..,rây phân tư...,chứ đi sâu hơn nữa thì chưa! Hiện tại rất cần tài liệu về nó để nghiên cứu thêm .Bạn có thể giúp đc không?

Mình ở hà nội, bạn ở đâu thế, mình được giao đề tài nghiên cứu về hydro hóa làm sạch dầu nhờn thải, để có thể xử lý trước tiên dầu cần được lọc để tách tạp chất bằng màng ceramic, thực ra ceramic chỉ là lõi gốm thôi, còn thì phải phủ màng lên đấy, mới đang ở giai đoạn đọc tài liệu.
Mình được thầy cho mượn cuốn "Membrane Technology in the Chemical Industry", có 300 trang thôi, đọc khá oải, bạn cần biết thì gọi cho mình
0914366316

Tôi cũng ở Hà Nội như bạn. Thế nào tôi sẽ đt cho bạn để giao lưu, trao đổi tri thức. Hiện tại tôi chưa có một tài liệu cụ thể nào về mambrane. Hy vọng khi gặp bạn tôi sẽ đc học hỏi nhiều hơn.

Chào bạn
Mình cũng đang là tính đồ của membrane. nhưng mình nghiên cứu ứng dụng trong xử lý nước thải.
Tài liệu về membrane mình có tương đối nhiều, file dạng PDF khoãng chục cuốn gì đó 100% english. Nếu các bạn có nhu cầu thì nhắn cho mình nhé.
email: olalasahara@yahoo.com
Cho mình xác minh lại cho rỏ nhe: các bạn đang nghiên cứu "mambrane" hay "membrane"?

I''m sorry! "Membrane"...Okie! tôi se gặp bạn để trao đổi thêm. Rât cám ơn bạn đã nhiệt tình. Biết đâu tôi cũng se trao đổi với bạn về kinh nghiẹm xử lý nc thải!

Rất vui khi nhân được sự hồi đáp của bạn.
Hiện nay mình đang ở nước ngoài nên chưa có data để gửi sách cho bạn tham khảo được, bạn cho mình địa chỉ email chính xác, khoảng 15/10/06 mình có mặt ở VN sẽ gửi sach cho bạn.

Rất cám ơn bạn! Địa chỉ email của tôi là : Moc_tui@yahoo.com .
Hẹn gặp lại bạn ở VN. chúc bạn may mắn và thành công.

Mình đang có những tài liệu này, bạn nào cần mình bán cho giá rẻ:
ELSEVIER Referex Engineering, Complete Collection
Chemical/Petrochemical and Process Collection
Volume 1/7: ChemE1
AHMED, T. H. (2000). Reservoir Engineering Handbook (2nd ed.)
AHMED, T. H. (2005). Advanced Reservoir Engineering
ARMAREGO, W. L. F. (2003). Purification of Laboratory Chemicals (5th ed.)
ARNOLD, K. (1998). Design of Oil-Handling Systems and Facilities (2nd ed.)
ARNOLD, K. (1999). Design of Gas-Handling Systems and Facilities (2nd ed.)
BAI, Y. (2001). Pipelines and Risers
BERTY, J. M. (1999). Experiments in Catalytic Reaction Engineering
BLOCH, H. P. (1996). Reciprocating Compressors - Operation and Maintenance
BLOCH, H. P. (2001). Turboexpanders and Process Applications
BOUBEL, R. W. (1994). Fundamentals of Air Pollution (3rd ed.)
BOYES, W. (2002). Instrumentation Reference Book (3rd ed.)
BRANAN, C. R. (2002). Rules of Thumb for Chemical Engineers (3rd ed.)
BROWN, R. N. (1997). Compressors - Selection and Sizing (2nd ed.)
BURNS, R. S. (2001). Advanced Control Engineering
BURNS, T. E. (2002). Serious Incident Prevention (2nd ed.)
BURYAKOVSKY, L. A. (2001). Petroleum Geology of the South Caspian Basin
CHEREMISINOFF, N. P. (2000). Handbook of Chemical Processing Equipment
CHEREMISINOFF, N. P. (2000). Handbook of Hazardous Chemical Properties
CHEREMISINOFF, N. P. (2002). Handbook of Air Pollution Prevention and Control
CHEREMISINOFF, N. P. (2002). Handbook of Water and Wastewater Treatment Technologies
CHHABRA, R. P. (1999). Non-Newtonian Flow in the Process Industries
CHIN, W. C. (2000). Computational Rheology for Pipeline and Annular Flow
CHIN, W. C. (2002). Quantitative Methods in Reservoir Engineering
CIVAN, F. (2000). Reservoir Formation Damage - Fundamentals, Modeling, Assessment, and Mitigation
COKER, A. K. (2001). Modeling of Chemical Kinetics and Reactor Design
DARLEY, H. C. H. (1988). Composition and Properties of Drilling and Completion Fluids (5th ed.)
DAVENPORT, W. G. (2002). Extractive Metallurgy of Copper (4th ed.)
ECKHOFF, R. K. (2003). Dust Explosions in the Process Industries (3rd ed.)
EL-HALWAGI, M. M. (1997). Pollution Prevention through Process Integration - Systematic Design Tools
EL-MAHALLAWY, F. (2002). Fundamentals and Technology of Combustion
FANCHI, J. R. (2000). Principles of Applied Reservoir Simulation (2nd ed.)
FLORCZAK, C. M. (2001). Hazardous Waste Compliance
FOLEY, H. C. (2002). An Introduction to Chemical Engineering Analysis Using MATHEMATICA
FULLWOOD, R. R. (1999). Probabilistic Safety Assessment in the Chemical and Nuclear Industries
GIBILARO, L. G. (2001). Fluidization Dynamics - A Predictive Theory
GOODFELLOW, H. (2001). Industrial Ventilation Design Guidebook
GRACE, R. D. (1994). Advanced Blowout and Well Control
JONES, A. G. (2002). Crystallization Process Systems
KLETZ, T. A. (1998). What Went Wrong - Case Histories of Process Plant Disasters (4th ed.)
KLETZ, T. A. (2001). Learning from Accidents (3rd ed.)
ELSEVIER Referex Engineering, Complete Collection
Chemical/Petrochemical and Process Collection
Volume 2/7: ChemE2
KLENIN, V. J. (1999). Thermodynamics of Systems Containing Flexible-Chain Polymers
KOHL, A. L. (1997). Gas Purification (5th ed.)
LAPEYROUSE, N. J. (2002). Formulas and Calculations for Drilling, Production, and Workover (2nd ed.)
LEES, F. P. (1995). Loss Prevention in the Process Industries (2nd ed.) (3 vols.)
LOBANOFF, V. S. (1992). Centrifugal Pumps - Design and Application (2nd ed.)
LUDWIG, E. E. (2001). Applied Process Design for Chemical and Petrochemical Plants (3rd ed.) (3 vols.)
LUETTGENS, G. (1997). Electrostatic Hazards
LYONS, W. C. (1996). Standard Handbook of Petroleum and Natural Gas Engineering (2 vols.)
MARTIN, W. F. (2000). Hazardous Waste Handbook for Health and Safety (3rd ed.)
MATAR, S. (2000). Chemistry of Petrochemical Processes (2nd ed.)
MCALLISTER, E. W. (2001). Pipeline Rules of Thumb Handbook (5th ed.)
MOSS, D. R. (2003). Pressure Vessel Design Manual (3rd ed.)
MUHLBAUER, W. K. (2004). Pipeline Risk Management Manual - Ideas, Techniques, and Resources (3rd ed.)
MULLIN, J. W. (2001). Crystallization (4th ed.)
MURRAY, R. L. (2000). Nuclear Energy - An Introduction to the Concepts, Systems, etc. (5th ed.)
NELSON, R. A. (2001). Geologic Analysis of Naturally Fractured Reservoirs (2nd ed.)
PAGE, J. S. (1999). Estimator''s Piping Man-Hour Manual (5th ed.)
PARISHER, R. A. (2001). Pipe Drafting and Design (2nd ed.)
PARKER, M. E. (1984). Pipe Line Corrosion and Cathodic Protection (3rd ed.)
POCIUS, A. V. (2002). Adhesion Science and Engineering (2 vols.)
RANADE, V. V. (2001). Computational Flow Modeling for Chemical Reactor Engineering
RATNER, B. D. (1996). Biomaterials Science - An Introduction to Materials in Medicine
REIS, J. C. (1996). Environmental Control in Petroleum Engineering
RICHARDSON, J. F. (2001). Coulson & Richardson''s Chemical Engineering Volume 4
RICHARDSON, J. F. (2002). Coulson & Richardson''s Chemical Engineering Volume 2 (5th ed.)
ROBINSON, L. (1999). Shale Shakers and Drilling Fluid Systems
SADEGHBEIGI, R. (2000). Fluid Catalytic Cracking Handbook (2nd ed.)
SANDERS, R. E. (1999). Chemical Process Safety - Learning from Case Histories
SANKS, R. L. (1998). Pumping Station Design (2nd ed.)
SHAW, D. J. (1992). Introduction to Colloid and Surface Chemistry (4th ed.)
ELSEVIER Referex Engineering, Complete Collection
Chemical/Petrochemical and Process Collection
Volume 3/7: ChemE3
ABELL, M. L. (1993). MATHEMATICA By Example (rev. ed.)
BEJAN, A. (2003). Heat Transfer Handbook
BIRD, R. B. (2001). Transport Phenomena (2nd ed.)
CLAYDEN, J. (2001). Organic Chemistry
DARBY, R. (2001). Chemical Engineering Fluid Mechanics (2nd ed.)
GRAY, J. W. (1994). Mastering MATHEMATICA - Programming methods and applications
KARRIS, S. T. (2004). Numerical Analysis Using MATLAB and Spreadsheets (2nd ed.)
KREITH, F. (1999). The CRC Handbook of Thermal Engineering
MAEDER, R. E. (1999). Computer Science with MATHEMATICA
RICE, R. G. (1994). Applied Mathematics and Modeling for Chemical Engineers
ROBBINS, A. H. (2003). Circuit Analysis - Theory and Practice (3rd ed.)
SHREIR, L. L. (1993). Corrosion (3rd ed.) (2 vols.)
SMITH, R. (2005). Chemical Process Design and Integration
SORENSEN, B. (2003). Renewable Energy (3rd ed.)
STOLEN, S. (2003). Chemical Thermodynamics of Materials - Macroscopic and Microscopic Aspects
SVAROVSKY, L. (2000). Solid-Liquid Separation (4th ed.)
TIAB, D. (2004). Petrophysics - Theory and Practice of Measuring Reservoir Rock Properties etc. (2nd ed.)
TIRATSOO, J. N. H. (1991). Pipeline Pigging Technology (2nd ed.)
TOSUN, I. (2002). Modelling in Transport Phenomena - A Conceptual Approach
UPP, E. L. (2001). Fluid Flow Measurement - A Practical Guide to Accurate Flow Measurement (2nd ed.)
URBEN, P. G. (1999). Bretherick''s Handbook of Reactive Chemical Hazards (6th ed.) (2 vols.)
VANDOREN, V. J. (2002). Techniques for Adaptive Control
VON BAECKMANN, W. (1997). Handbook of Cathodic Corrosion Protection (3rd ed.)
WALAS, S. M. (1988). Chemical Process Equipment - Selection and Design
WEINER, R. F. (2003). Environmental Engineering (4th ed.)
WOLFRAM, Stephen (2003). The MATHEMATICA Book (5th ed.)
WOODARD, F. (2000). Industrial Waste Treatment Handbook
YAWS, C. L. (1996). Handbook of Thermodynamic Diagrams (4 vols.)
ZAPPE, R. W. (1998). Valve Selection Handbook (4th ed.)

ELSEVIER Referex Engineering, Complete Collection
Mechanical and Materials Collection
Volume 4/7: MechE1
AL****, C. B. (2000). Thermochemical Processes - Principles and Models
ASHBY, M. F. (1998). Engineering Materials (2nd ed.) (2 vols.)
ASHBY, M. F. (2000). Metal Foams - A Design Guide
BACHUS, L. (2003). Know and Understand Centrifugal Pumps
BAI, Y. (2003). Marine Structural Design
BAKER, A. A. (2002). Advances in the Bonded Composite Repair of Metallic Aircraft Structure (2 vols.)
BERTRAM, V. (2000). Practical Ship Hydrodynamics
BIRD, J. (2003). Engineering Mathematics (4th ed.)
BLAZEK, J. (2001). Computational Fluid Dynamics - Principles and Applications
BLOCH, H. P. (1990). Machinery Component Maintenance and Repair (2nd ed.)
BLOCH, H. P. (1996). Major Process Equipment Maintenance and Repair (2nd ed.)
BLOCH, H. P. (1998). Improving Machinery Reliability (3rd ed.)
BONNICK, A. W. M. (2001). Automotive Computer Controlled Systems - Diagnostic Tools and Techniques
BOOKER, J. D. (2001). Designing Capable and Reliable Products
BOYCE, M. P. (2001). Gas Turbine Engineering Handbook (2nd ed.)
BRAMWELL, A. R. S. (2001). Bramwell''s Helicopter Dynamics (2nd ed.)
BRANDES, E. A. (1992). Smithells Metals Reference Book (7th ed.)
BRANDES, E. A. (1998). Smithells Light Metals Handbook
BROWN, J. R. (1999). Foseco Non-Ferrous Foundryman''s Handbook (11th ed.)
BROWN, J. R. (2000). Foseco Ferrous Foundryman''s Handbook
BRUNDLE, C. R. (1992). Encyclopedia of Materials Characterization - Surfaces, Interfaces, Thin Films
BRYDSON, J. A. (1999). Plastics Materials (7th ed.)
BURCHELL, T. D. (1999). Carbon Materials for Advanced Technologies
BUTLER, D. (2000). Guide to Ship Repair Estimates - In Man-Hours
CAHN, R. W. (1996). Physical Metallurgy (4th ed.) (3 vols.)
CAHN, R. W. (2001). The Coming of Materials Science
CAMPBELL, B. A. (1996). Introduction to Space Sciences and Spacecraft Applications
CAMPBELL, J. (2003). Castings - The New Metallurgy of Cast Metals (2nd ed.)
CARPINTERI, A. (2003). Biaxial-Multiaxial Fatigue and Fracture
CARSON, P. (2002). Hazardous Chemicals Handbook (2nd ed.)
CARVILL, J. (1993). Mechanical Engineer''s Data Handbook
CHILDS, T. (2000). Metal Machining - Theory and Applications
****CROFT, A. N. (2004). A Guide to the Collision Avoidance Rules (6th ed.)
CRAWFORD, R. J. (1998). Plastics Engineering (3rd ed.)
DERRETT, D. R. (1999). Ship Stability for Masters and Mates (5th ed.)
DIXON, S. L. (1998). Fluid Mechanics, Thermodynamics of Turbomachinery (4th ed.)
ELICES M. (2002). Fiber Fracture
ENDO, M. (1996). Carbon Nanotubes
EYRES, D. J. (2001). Ship Construction (5th ed.)
GARRETT, T. K. (2001). The Motor Vehicle (13th ed.)
HALEVI, G. (2001). Handbook of Production Management Methods
HEISLER, H. (2002). Advanced Vehicle Technology (2nd ed.)
HODKINSON, R. (2001). Lightweight Electric Hybrid Vehicle Design
HORLOCK, J. H. (2003). Advanced Gas Turbine Cycles
HOUGHTON, E. L. (2002). Aerodynamics for Engineering Students (5th ed.)
HOUSE, D. J. (2001). Seamanship Techniques (2nd ed.)
HOYLE, D. (2000). Automotive Quality Systems Handbook
HOYLE, D. (2001). ISO 9000 Quality Systems Handbook (4th ed.)
HOYLE, D. (2003). ISO 9000_ 2000 - An A-Z Guide
HUDSON, J. A. (2000). Engineering Rock Mechanics (2 vols.)
JENKINSON, L. R. (2003). Aircraft Design Projects for Engineering Students
JONES, D. R. H. (2001). Failure Analysis Case Studies II
JUDD, S. (2003). Membranes for Industrial Wastewater Recovery and Re-Use
KIM, J.-K. (1998). Engineered Interfaces in Fiber Reinforced Composites
KING, R. P. (2002). Introduction to Practical Fluid Flow
KUNDU, P. K. (2001). Fluid Mechanics (2nd ed.)
ELSEVIER Referex Engineering, Complete Collection
Mechanical and Materials Collection
Volume 5/7: MechE2
LAI, W. M. (1993). Introduction to Continuum Mechanics (3rd ed.)
LESTER, A. (2003). Project Planning and Control (4th ed.)
LIENGME, B. V. (2002). A Guide to Microsoft Excel 2002 for Scientists and Engineers (3rd ed.)
MARCINIAK, Z. (2002). Mechanics of Sheet Metal Forming (2nd ed.)
MARGHITU, D. B. (2001). Mechanical Engineer''s Handbook
MATTHEWS, C. (2001). Aeronautical Engineer''s Data Book
MCFARLANE, B. (2002). Beginning AutoCAD 2002
MCFARLANE, B. (2002). Modelling with AutoCAD 2002
MCGEORGE, H. D. (1995). Marine Auxiliary Machinery (7th ed.)
MEGSON, T. H. G. (1999). Aircraft Structures for Engineering Students (3rd ed.)
MERCER, R. B. (2001). Industrial Control Wiring Guide (2nd ed.)
MOBLEY, R. K. (1999). Root Cause Failure Analysis
MOBLEY, R. K. (1999). Vibration Fundamentals
MOBLEY, R. K. (2002). An Introduction to Predictive Maintenance (2nd ed.)
MOBLEY, R. K. (2003). Plant Engineering Handbook
MOMBER, A. W. (2002). Hydroblasting and Coating of Steel Structures
MURAKAMI, Y. (2002). Metal Fatigue - Effects of Small Defects and Nonmetallic Inclusions
NEALE, M. J. (1995). The Tribology Handbook (2nd ed.)
OAKLAND, J. S. (2003). Statistical Process Control (5th ed.)
OHRING, M. (1991). The Materials Science of Thin Films
PACEJKA, H. B. (2002). Tyre Mechanics and Vehicle Dynamics
PAIDOUSSIS, M. P. (1998). Fluid-Structure Interactions - Slender Structures and Axial Flow (vol. 1)
POPE, J. E. (1996). Rules of Thumb for Mechanical Engineers
RAWSON, K. J. (2001). Basic Ship Theory (5th ed.) (2 vols.)
REIMPELL, J. (2001). The Automotive Chassis - Engineering Principles (2nd ed.)
RIBBENS, W. B. (1997). Understanding Automotive Electronics (5th ed.)
RIDLEY, J. (2002). Safety at Work (6th ed.)
ROSATO, D. V. (2003). Plastics Engineered Product Design
SANDLER, B.-Z. (1999). Robotics - Designing the Mechanisms for Automated Machinery (2nd ed.)
SCHNEEKLUTH, H. (1998). Ship Design for Efficiency and Economy (2nd ed.)
SIDERIS, M. (1998). Methods for Monitoring and Diagnosing the Efficiency of Catalytic Converters
SMALLMAN, R. E. (1999). Modern Physical Metallurgy and Materials Engineering - Science, Process, Application
SMITH, D. J. (2001). Reliability, Maintainability and Risk - Practical Methods for Engineers (6th ed.)
SMITH, E. H. (1994). Mechanical Engineer''s Reference Book (12th ed.)
STACHOWIAK, G. W. (2000). Engineering Tribology (2nd ed.)
STOLARSKI, T. A. (1990). Tribology in Machine Design
TANAKA, K. (1999). The Science and Technology of Carbon Nanotubes
TAYLOR, D. A. (1996). Introduction to Marine Engineering (2nd ed.)
TETLEY, L. (2001). Electronic Navigation Systems (3rd ed.)
TONG, L. (2002). 3D Fibre Reinforced Polymer Composites
TROTT, A. R. (2000). Refrigeration and Air-Con***ioning (3rd ed.)
TUPPER, E. C. (1996). Introduction to Naval Architecture (3rd ed.)
VASILIEV, V. V. (2001). Mechanics and Analysis of Composite Materials
WATSON, D. G. M. (1998). Practical Ship Design
WILLMOTT, P. (2001). TPM - A Route to World-Class Performance
WOODYARD, D. F. (2004). Pounder''s Marine Diesel Engines and Gas Turbines (8th ed.)
WU, Y.-S. (2001). Practical Design of Ships and Other Floating Structures (vol. 1)
YASUDA, E. (2003). Carbon Alloys - Novel Concepts to Develop Carbon Science and Technology
YUN, L. (2000). Theory and Design of Air Cushion Craft
ZIENKIEWICZ, O. C. (2000). The Finite Element Method (5th ed.) (3 vols.)
ELSEVIER Referex Engineering, Complete Collection