Lớp học tiếng Anh cô giáo PHƯƠNG THÙY (cô Thùy_ED Lò Đúc) - Lớp học TA lâu đời nhất trên TTVNOL từ 2

The table describes percentages of homeschooled students in Some Country in 1999-2004.
We can see from the table that all grades including kindergarten is growing for every year. Kindergraten started at 2.4 percent in 1999 and ended highest at 2.9 percent in 2004 with a constant increase. Though grades 1-2 and 5-6 shows a little different trend, both started at 1.5 percent in 1999 and declines a little bit in 2000. Both of them increased slowly in 2002 and increased highest in 2004 with 2.1 percent for grades 1-2 and 2.6 percent for grades 5-6.
Grades 3-4 had a slow but steady growth throught all six years. It started at 1.6 percent in 1999 and increased 0.1 percent every year except in 2003 when It peaked up 0.2 percent . Grades 7-8 stared at 1.6 percent and stayed there for three years until it Rapidly rose up to 2.2 percent and peaked at 2.5 percent in 2004.
E Phuong Hoa E62 nop bai

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Em Việt Anh lớp E61 nộp bài writing, nhóm 1


Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}
GROUP 1
[FONT=&quot]The diagram below shows the typical stages of consumer goods manufacturing, including the process by which information is fed back to earlier stages to enable adjustment.[/FONT][FONT=&quot]

[FONT=&quot]Write a report for a university lecturer describing the process shown.[/FONT][/FONT]
--------------------------------------------------------------------------

The diagram shows the process of consumer goods manufacturing in a company. First, raw material and manufactured components is stored. After that, the product is researched and designed to match with the need of the customers. Then all parts of the product is assembled to get a perfect one. Inspection is one of the most important steps to make sure that there are not any errors on product. The product is then tested, which is the most important step. Almost errors are found in this period. The product may be designed again if its not available. If all of these steps are ok, the product is then packaged and ready to be dispatched to agents for selling.
Market research is also an important step to decide which design is favorable. Based on that, the company can start doing advertisement campaign.[FONT=&quot][/FONT]

Em Quân E60 nộp bài :
Dear ...,

How are you ? my college is holding an open day next month on the Saturday 7 April so I want to invite you to attend. I will very glad to see you in there.
The open day programe will start 10.00 am . you will opportunity visit my college and will know any more about my college.
In the morning , there is Gymnastic display on sports field and coffee available in canteen all the morning if you need. The time of lunch from 12.00 to 1.30 pm .
In the afternoon , the next programe is rock convert and drama by student in hall. Tea available in canteen. On the 4.30 pm, if you have any question our college, our principal will answer for you.
Besides, the gardens and art room display will open all day and you can try sports facilities if you want.
I’m looking forward to see you in there
Your sincerely

Em Nguyen Van Manh_E61 gui bai

Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} The diagram shows the information about the Hawaiian island chain in the centre of the Pacific Ocean
As we can see in the diagram, there are 7 major islands in the Pacific Ocean. Among that the Hawaii Island is the biggest and the Niihau Island is the smallest, it is the one furthest from the Hawaii. The Hawaiian island chain includes 4 volcanos in the centre of the Pacific Ocean, the oldest volcano was established in about 80 million years ago in the Western, and the youngest volcano develops in the southern, it is built up by numerous eruptions in the history. The eruption process begins from the bottom, originating 2883 km down from see level. Above that, there are the Hot Spot and Magma spumes which remain static at the normal stage. Each year, the Pacific tectonic plate which is above the solid dense rock, shift its direction form the East to the West about 7 – 9 cm.

Hi chị ^^, em Phương Hồng lớp E61 nộp bài Writing Task 1 Group 1 ạh:


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} The diagram illustrates the normal phases of consumer goods manufacturing and information feedback to previous stages.


At the first stages, raw materials and manufactured components are prepared for storage and production planning. Design step is result from product research, which is also affect to production planning. The next step is assembly. After assembly, the products are inspected and tested to check the quality. If the products achieve standard of testing stage, they will be packaged and dispatched for sales.



In the next stage, information is fed back to previous stages to enable adjustment. Design is influenced by testing and market research. Besides, advertising is adjusted by market research. However, market research itself is dependent on sales results. Production planning is also adjusted by sales. Moreover, packaging is oriented by market research to lead to good results of sales. Storage is also dependent on production planning, which will be adjusted to achieve a suitable sales strategy.



Overall, the normal stages of consumer goods manufacturing is incorporated closely of production process and information feedback.

Em Nguyễn E61 gui bai writing diagram! Group 3.
The Eiffel tower is situated close to the Seine River and near Ecole Militaire in Paris. It is known a great architecture in the world with a metal structure that is 324m high and weighs 10,100 tonnes. It has two platforms with 57m in first and 115m in second. Otherwise there are 1,165 steps that can be climbed in order to reach the two viewing platforms.
Nowadays there is a project to extend below the foundations of the tower. The main this project include the build up of five underground levels that are shown on the diagram like the tower’s ticket office, shops and restaurants, a cinema and museum and two floors of underground parking.
Although the details of project have to be finalize but the principle is that five floors will be connected by two vertical passengers lifts on either side of the tower, which is planned to house for the ticket office, will also consist of a large atrium with a glass ceilling so that visitor can look directly up at the tower itself.

Mai Phuong – E61 Writing – Task1 – Group 2

The diagram gives the information about the constructive process of the Hawaiian island chain, which is surrounded by the Pacific Ocean.

Those islands form a chain that is stretched to the northwest and southeast include some major islands such as Hawaii, Maui, Lanai, Molokai, Niihau… It is formed of volcanoes which are created by the eruption process begins in the bottom of the solid dense rock. It is obvious from the diagram that after “hot spot” spume remains static, magma spume forms. This magma may originate as deep as 2883 km below the surface of the ocean. At the end of this process, numerous eruptions happened, and as a result youngest volcano develops. The direction of shift of the Pacific tectonic plate is about 7 to 9 cm per year, to the west.

On the whole, the Hawaiian volcanic chain is the result of the drifting of the Pacific Plate over a fixed “hot spot”.

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} [FONT=&quot]Em Trà Linh nộp writing task 1 group 3
[/FONT]
[FONT=&quot]The diagram shows the Eiffel Tower and the outline project for extending its underground.[/FONT]
[FONT=&quot]Eiffel is a old mental structure lying the West of French and to be near Seine River. It has a total height of 324 metres and a weight of 10.100 tonnes. With this height, Eiffel has become the highest tower in over the world. It is designed four parts including foundations, two platforms and the peak of the tower. There are two foundations which were designed parallelly together acting as solid legs of the Tower.The next is viewing platforms which are the middle of the tower. The distance between two platforms is about 1,665 steps. From here, people can view the whole of Paris city. It is 57 metres from the ground to the first platform and 115 metres to the second platform.[/FONT]
[FONT=&quot]Besides, as can see from the diagram, the outline project to extend the tower underground. Following the project, there are five levels underground serving to relax and park for visitors. People can go down underground by means of lifts designed symmetrically. The ceiling of level is made from the glass. Every level has a different function as the first level serves for ticket office and accesses to tower for visitors, the second level is organ for shops and restaurants, next to, there are museum and cinema and finally fourth and fifth level are used for parking.[/FONT]
[FONT=&quot]In conclusion, information from the diagram about the Eiffel Tower and the outline project, in the future, there are many people in over the world visiting this Tower.[/FONT]
[FONT=&quot] [/FONT]

Em Tường Minh lớp E61 nộp bài Writing Task 1 Group 1 chị nhé:

The diagram illustrates the flow in which consumer goods manufacturing is processed vie various stages and the way in which information is fed back to adjust earlier stages.

First of all, raw materials and manufactured components are collected and stored to prepare for the stage of production planning. At the same time, a detail design is provided for this stage after a period of researching characterizes of specific product. Based on the combination of materials and design, assembly stage is processed to build the primary good, whose quality is checked and improved later over inspection and testing periods. When the product is manufactured successful and perfectly, it is packed and despatched to market for sales to consumers, which is also the end stage of whole manufacturing process.

During those typical stages of consumer goods manufacturing, there is the special process which supports the flows of information feedback to enable adjustment in early stages. There are feedbacks of the testing and market research stages, or indirectly, the sales stage, to the design process, which help designer to take an overview of particular product and the desires of consumer about it. There is also information fed back from market research *****ggest the contribution in packaging or the factors which suite consumers’ tastes in advertising.

Therefore, it is considered that the good consumer products manufacturing nowadays includes not only the typical stages but also a flexible feedback process to improve on.

cô ơi, em là nguyễn minh hậu E61 ạ. cô cho em nộp bài writing task1 đợt 2 về diagram ạ
Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The diagrams show information about the location, structure and technological parameters of the Eiffel Tower in Paris, together with sketching out a plan for the subterranean activities.
Eiffel Tower is a tower that lies close to the Seine river, by which the Tower is separated from Place de la Concorde, to the northeast. The nearest place is Ecole Militaire, which is the southeast away. The Tower has a view over hotel des invalides, Musee d’Orsay, Musee du Louvre, to the east, and the Jardin du Luxembourg, to the farther of the southeast.
The Tower is 324 meters in height and the weight of metal structure is 10,100 tonnes. The viewing platforms having 1,665 steps include the first platform 57 meters in height and the second one 115 in height.
[FONT=&quot]The Tower has 5 underground levels. The first one, which is situated under the foundation of the Tower and the glass ceilling, is the ticket office along with the access to the Tower by using the lift. Some shops and restaurants are formed at the second one and the cinema together with the museum are located in the third one. Two final levels contain the parking for the visitors[/FONT]