Tài liệu IEEE - 2nd (đọc kỹ bài đầu tiên trước khi gửi yêu cầu)

Chào docat!
Nhờ bạn download giúp mình mấy tài liệu này với:
[1] Optimum Number, Location, and Size of Shunt Capacitors in Radial Distribution Feeders A Dynamic Programming Approach
Dura, H.
University of the Andes;
This paper appears in: IEEE Transactions on Power Apparatus and Systems
Publication Date: Sept. 1968
Volume: PAS-87, Issue: 9
On page(s): 1769-1774
ISSN: 0018-9510
Digital Object Identifier: 10.1109/TPAS.1968.291982
Date Published in Issue: 2007-01-29 14:57:07.0
http://ieeexplore.ieee.org/iel5/10669/4073706/04073713.pdf?tp=&isnumber=4073706&arnumber=4073713
[2] Analytical Method of Capacitor Allocation on Distribution Primary Feeders
Bae, Y. G.
Portland General Electric Company;
This paper appears in: IEEE Transactions on Power Apparatus and Systems
Publication Date: July 1978
Volume: PAS-97, Issue: 4
On page(s): 1232-1238
ISSN: 0018-9510
Digital Object Identifier: 10.1109/TPAS.1978.354605
Date Published in Issue: 2007-05-07 11:31:24.0
http://ieeexplore.ieee.org/iel5/10669/4181522/04181552.pdf?tp=&isnumber=&arnumber=4181552
[3] Optimal capacitor placement on radial distribution systems
Baran, M.E. Wu, F.F.
Dept. of Electr. Eng. & Comput. Sci., California Univ., Berkeley, CA;
This paper appears in: Power Delivery, IEEE Transactions on
Publication Date: Jan 1989
Volume: 4, Issue: 1
On page(s): 725-734
ISSN: 0885-8977
References Cited: 17
CODEN: ITPDE5
INSPEC Accession Number: 3395422
Digital Object Identifier: 10.1109/61.19265
Date Published in Issue: 2002-08-06 16:37:08.0
http://ieeexplore.ieee.org/iel3/61/730/00019265.pdf?tp=&isnumber=730&arnumber=19265

[4] Optimal sizing of capacitors placed on a radial distribution system
Baran, M. Wu, F.F.
Dept. of Electr. Eng. & Comput. Sci., California Univ., Berkeley, CA;
This paper appears in: Power Delivery, IEEE Transactions on
Publication Date: Jan 1989
Volume: 4, Issue: 1
On page(s): 735-743
ISSN: 0885-8977
References Cited: 25
CODEN: ITPDE5
INSPEC Accession Number: 3395423
Digital Object Identifier: 10.1109/61.19266
Date Published in Issue: 2002-08-06 16:37:08.0
http://ieeexplore.ieee.org/iel3/61/730/00019266.pdf?tp=&isnumber=730&arnumber=19266

[5] Optimal selection of capacitors for radial distribution systems using a genetic algorithm
Sundhararajan, S. Pahwa, A.
Dept. of Electr. & Comput. Eng., Kansas State Univ., Manhattan, KS;
This paper appears in: Power Systems, IEEE Transactions on
Publication Date: Aug 1994
Volume: 9, Issue: 3
On page(s): 1499-1507
ISSN: 1558-0679
References Cited: 2
CODEN: ITPSEG
INSPEC Accession Number: 4768486
Digital Object Identifier: 10.1109/59.336111
Date Published in Issue: 2002-08-06 19:40:24.0
http://ieeexplore.ieee.org/iel1/59/7897/00336111.pdf?tp=&isnumber=7897&arnumber=336111

[6] Capacitor placement in radial distribution systems for lossreduction
Haque, M.H.
Sch. of Electr. & Electron. Eng., Nanyang Technol. Univ.;
This paper appears in: Generation, Transmission and Distribution, IEE Proceedings-
Publication Date: Sep 1999
Volume: 146, Issue: 5
On page(s): 501-505
ISSN: 1350-2360
References Cited: 15
CODEN: IGTDE2
INSPEC Accession Number: 6383253
Digital Object Identifier: 10.1049/ip-gtd:19990495
Date Published in Issue: 2002-08-06 22:45:39.0
http://ieeexplore.ieee.org/iel5/2195/17456/00806197.pdf?tp=&isnumber=17456&arnumber=806197
[7] Capacitor allocation by approximate reasoning: fuzzy capacitorplacement
Ng, H.N. Salama, M.M.A. Chikhani, A.Y.
Dept. of Electr. & Comput. Eng., Waterloo Univ., Ont.;
This paper appears in: Power Delivery, IEEE Transactions on
Publication Date: Jan 2000
Volume: 15, Issue: 1
On page(s): 393-398
ISSN: 0885-8977
References Cited: 28
CODEN: ITPDE5
INSPEC Accession Number: 6626885
Digital Object Identifier: 10.1109/61.847279
Date Published in Issue: 2002-08-06 23:18:47.0
http://ieeexplore.ieee.org/iel5/61/18392/00847279.pdf?tp=&isnumber=&arnumber=847279

[8] Particle Swarm Optimization Based Capacitor Placement on Radial Distribution Systems
Prakash, K. Sydulu, M.
Member, IEEE, Research Scholar, National Institute of Technology, Deemed University, Warangal (A.P), 506004 India. e-mail:
prakashkam@yahoo.co.in;
This paper appears in: Power Engineering Society General Meeting, 2007. IEEE
Publication Date: 24-28 June 2007
On page(s): 1-5
Location: Tampa, FL, USA,
ISSN: 1932-5517
ISBN: 1-4244-1298-6
Digital Object Identifier: 10.1109/PES.2007.386149
Date Published in Issue: 2007-07-23 09:42:21.0
http://ieeexplore.ieee.org/iel5/4275198/4275199/04275915.pdf?tp=&isnumber=&arnumber=4275915

[9] A Novel Discrete Particle Swarm Optimization Algorithm for Optimal Capacitor Placement and Sizing
AlHajri, M.F. AlRashidi, M.R. El-Hawary, M.E.
Dalhousie Univ., Halifax;
This paper appears in: Electrical and Computer Engineering, 2007. CCECE 2007. Canadian Conference on
Publication Date: 22-26 April 2007
On page(s): 1286-1289
Location: Vancouver, BC,
ISSN: 0840-7789
ISBN: 1-4244-1020-7
INSPEC Accession Number: 9702047
Digital Object Identifier: 10.1109/CCECE.2007.327
Date Published in Issue: 2007-07-30 10:03:55.0
http://ieeexplore.ieee.org/iel5/4232658/4232659/04232986.pdf?tp=&isnumber=&arnumber=4232986

[10] An efficient iterative method for load-flow solution in radialdistribution networks
Augugliaro, A. Dusonchet, L. Ippolito, M.G. Sanseverino, E.R.
Dept. of Electr. Eng., Palermo Univ.;
This paper appears in: Power Tech Proceedings, 2001 IEEE Porto
Publication Date: 2001
Volume: 3, On page(s): 6 pp. vol.3-
Meeting Date: 09/10/2001 - 09/13/2001
Location: Porto, Portugal
ISBN: 0-7803-7139-9
References Cited: 11
INSPEC Accession Number: 7196996
Digital Object Identifier: 10.1109/PTC.2001.964878
Date Published in Issue: 2002-08-06 23:56:14.0
http://ieeexplore.ieee.org/iel5/7632/20826/00964878.pdf?tp=&isnumber=20826&arnumber=964878

[11] Optimal capacitor placement in radial distribution networks
Gallego, R.A. Monticelli, A.J. Romero, R.
UTP, Pereira;
This paper appears in: Power Systems, IEEE Transactions on
Publication Date: Nov 2001
Volume: 16, Issue: 4
On page(s): 630-637
ISSN: 1558-0679
References Cited: 14
CODEN: ITPSEG
INSPEC Accession Number: 7084839
Digital Object Identifier: 10.1109/59.962407
Date Published in Issue: 2002-08-07 00:10:03.0
http://ieeexplore.ieee.org/iel5/59/20771/00962407.pdf?tp=&isnumber=20771&arnumber=962407
[12] A new fuzzy-reasoning approach to optimum capacitor allocation forprimary distribution systems
Ching-Tzong Su Chih-Cheng Tsai
Inst. of Electr. Eng., Nat. Chung Cheng Univ., Chiayi;
This paper appears in: Industrial Technology, 1996. (ICIT ''96), Proceedings of The IEEE International Conference on
Publication Date: 2-6 Dec 1996
On page(s): 237-241
Meeting Date: 12/02/1996 - 12/06/1996
Location: Shanghai, China
ISBN: 0-7803-3104-4
References Cited: 12
INSPEC Accession Number: 5609896
Digital Object Identifier: 10.1109/ICIT.1996.601580
Date Published in Issue: 2002-08-06 20:20:10.0
http://ieeexplore.ieee.org/iel3/4796/13254/00601580.pdf?tp=&isnumber=13254&arnumber=601580
[13] Shunt capacitor sizing for radial distribution feeders withdistorted substation voltages
Baghzouz, Y. Ertem, S.
Comput. Sci. & Electr. Eng., Nevada Univ., Las Vegas, NV;
This paper appears in: Power Delivery, IEEE Transactions on
Publication Date: Apr 1990
Volume: 5, Issue: 2
On page(s): 650-657
ISSN: 0885-8977
References Cited: 11
CODEN: ITPDE5
INSPEC Accession Number: 3691338
Digital Object Identifier: 10.1109/61.53067
Date Published in Issue: 2002-08-06 17:21:54.0
http://ieeexplore.ieee.org/iel3/61/1916/00053067.pdf?tp=&isnumber=1916&arnumber=53067
[14] Loss reduction in radial distribution systems by capacitor placement: fuzzy technique
Balakumaran, J. Thanuskodi, K.
This paper appears in: E-Tech 2004
Publication Date: 31 July 2004
On page(s): 23- 29
ISSN:
ISBN: 0-7803-8655-8
INSPEC Accession Number: 8162145
Digital Object Identifier: 10.1109/ETECH.2004.1353839
Date Published in Issue: 2004-11-15 09:48:10.0
http://ieeexplore.ieee.org/iel5/9365/29744/01353839.pdf?tp=&isnumber=29744&arnumber=1353839
[15] Method for load-flow solution of radial distribution networks
Ghosh, S. Das, D.
Dept. of Electr. Eng., Indian Inst. of Technol., Kharagpur;
This paper appears in: Generation, Transmission and Distribution, IEE Proceedings-
Publication Date: Nov 1999
Volume: 146, Issue: 6
On page(s): 641-648
ISSN: 1350-2360
References Cited: 17
CODEN: IGTDE2
INSPEC Accession Number: 6423757
Digital Object Identifier: 10.1049/ip-gtd:19990464
Date Published in Issue: 2002-08-06 22:52:09.0
http://ieeexplore.ieee.org/iel5/2195/17772/00820368.pdf?tp=&isnumber=17772&arnumber=820368
Tất cả 15 bài, hơi nhiều một chút nhưng mình đang rất cần, mong bạn cố gắng giúp. Cảm ơn bạn.

Là đường link của tài liệu (link trực tiếp đến file pdf là tốt nhất), ví dụ như vầy:
http://ieeexplore.ieee.org/iel5/10669/4073706/04073713.pdf?tp=&isnumber=4073706&arnumber=4073713
@tuananha1: đã có tài liệu cho bạn
http://www.box.net/shared/modpq4yg5d

Chào docat!
Cám ơn bạn nhiều, mình đã nhận đủ tài liêu.

@docat và @nghichnham:
Nho ban down giup tieu chuan sau:
IEEE Std 762-2006 : IEEE standard definitions for use in reporting electric generating unit reliability, availability, and productivity
"các định nghĩa chuẩn sử dụng trong báo cáo về tính sẵn sàng, tin cậy và khả năng sản xuất của tổ máy phát điện"
Cam on rat nhieu!

http://www.box.net/shared/modpq4yg5d

please help me
A high speed machining algorithm for CNC machine tools
Abstract
This paper introduces a high speed machining algorithm based on a look-ahead interpolation technique for the machining of 3D surface obtained by a CAD/CAM system. Generally, specification of CNC system for high speed machining requires an ad***ional hardware and it burdens end users with ad***ional cost. The purpose of this research is to develop the low cost CNC controller having the high speed machining ability. The experimental results demonstrate that the proposed algorithm improves the machining speed in the program consisting of small line blocks without any hardware support. To investigate the performance of the introduced algorithm, the authors implemented it to the machining center equipped with Samsung SNC that consists of a 64 bit main processor and a 32 bit floating point DSP as the motion control CPU
link: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?arnumber=819445&isnumber=17712&punumber=6620&k2dockey=819445@ieeecnfs&query=(cnc)%3Cin%3Emetadata&pos=20
The open CNC controller for a cutting machine
Abstract
The paper addresses the field of factory automation within the scope of an open machine control system. It presents a CNC controller for a cutting machine. It involves a PC based controller that has been built on base of the open QNX real-time operating system platform. Microsoft Windows, which is a commonly accepted graphical user interface environment, serves as the front-end of the HMI. The CNC controller and the HMI are interconnected by the Ethernet TCP/IP link. The control system is flexible and modular. It supports CAD/CAM and network link to the office-level of factory automation. The application is thoroughly presented with the highlight on real-time features; the QNX real-time operating system and Ethernet TCP/IP technology for the use in a networked automated factory are also described.
link: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?arnumber=1290841&isnumber=28746&punumber=9059&k2dockey=1290841@ieeecnfs&query=(cnc)%3Cin%3Emetadata&pos=15
Variable structure control of AC servomotors for performance improvement in CNC applications
Abstract
A variable structure controller is developed for AC servomotors used in computer-numerical-controlled (CNC) milling machines. The controller designed is implemented as an outer loop controller to a factory designed motor servo-pack system. The variable structure controller is designed for a fast response when the speed tracking error is large, and for small oscillations when the speed tracking error is small. The controller designed is installed on a CNC milling machine using a PC, and milling experiments were performed. The results show improved performance over the factory-designed controller
link: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?arnumber=601657&isnumber=13254&punumber=4796&k2dockey=601657@ieeecnfs&query=(cnc)%3Cin%3Emetadata&pos=0
Windows XP Embedded based Open Architecture Computer Numerical Control System
Abstract
High efficiency and low cost have been the focus of embedded system development, and computer numerical control (CNC) system based on PC and Windows operating system is the main stream of open-architecture system. The characteristics and requirements of open-architecture CNC system is introduced briefly. A new method that develops the open-architecture CNC system based on PC and Windows XP Embedded operating system was put forward. The structure of the open-architecture CNC system based on real-time serial communication bus is described briefly, and a software open-architecture CNC system based on Windows XP Embedded is presented elementarily. The development process to create a run-time image with Windows XP Embedded Studio is given
link: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?arnumber=4077786&isnumber=4077749&punumber=4077748&k2dockey=4077786@ieeecnfs&query=(cnc)%3Cin%3Emetadata&pos=2
PC Versus CNCÂWhich Do You Choose?
Abstract
Recent advances in programmable controller technology, particularly in the area of motion control, have redefined the distinctions between programmable controllers (PC''s) and computer numerical controls (CNC''s). Advanced PC''s now offer new features, such as coordinated motion control of multiple axes. The benefits of new PC''s that make them the preferred choice over CNC''s in many machine control applications are discussed. These benefits include: 1) flexibilityÂcustomer configurable, 2) ease of useÂladder diagrams and modular software, 3) cost savingsÂless expensive hardware and software. Application examples are used to illustrate how PC''s can perform functions heretofore limited to CNC''s. In ad***ion, new applications that were impractical to implement with CNC''s are discussed.
link: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?arnumber=4504576&isnumber=4504571&punumber=28&k2dockey=4504576@ieeejrns&query=(cnc)%3Cin%3Emetadata&pos=1

All done
http://www.box.net/shared/modpq4yg5d

May quá, em đang sống giở chết giở vì không tìm được tài liệu, nhờ các anh down hộ em cái ạ, em cám ơn nhiều lắm ạ
[1] Quality-of-service provisioning system for multimedia transmission in IEEE 802.11 wireless LANs
Der-Jiunn Deng Hsu-Chun Yen
Dept. of Electr. Eng., Nat. Taiwan Univ., Taipei, Taiwan
This paper appears in: Selected Areas in Communications, IEEE Journal on
Publication Date: June 2005
Volume: 23 , Issue: 6
On page(s): 1240 - 1252
ISSN: 0733-8716
Digital Object Identifier: 10.1109/JSAC.2005.845632
Date Published in Issue: 2005-06-13 13:09:03.0
http://www.ieeexplore.ieee.org/iel5/49/30928/01435517.pdf?tp=&arnumber=1435517&isnumber=30928
Tiện đây nếu ai có tài liệu về 802.11n của ieee thì cho em xin với ạ!!!

Nhờ pác down giúp em file này với:
A review of faults detectable by gas-in-oil analysis intransformers.
Duval, M.
Electrical Insulation Magazine, IEEE
Volume 18, Issue 3, May/Jun 2002 Page(s):8 - 17
Digital Object Identifier 10.1109/MEI.2002.1014963
Thanks pác nhiều nha!!

Đã có tài liệu cho 2 bạn
http://www.box.net/shared/modpq4yg5d