Tài liệu IEEE(đọc kỹ bài đầu tiên trước khi gửi yêu cầu)

To bác nghichnham.
hihiii... bác giúp e cái này nữa nha, thanks!!!!!!!!
[1]. Intelligent microprocessor-based devices provide advanced motor protection, flexible control, and communication in paper mills.
Farag, S.F.; Jhaveri, M.K.;
[2]. Electronically enhanced low voltage motor protection and control.
Farag, S.F.; Bartheld, R.G.; May, W.E.;
[3].Improving existing motor protection for medium voltage motors.
Paoletti, G.J.; Rose, A.;
[4]. Coupled Current and Thermal Problem in the Motor Protection Switch; Verification of Calculated Temperature With Measured Ones.
Hrovat, G.; Hamler, A.;
[5]. An integrated on-line motor protection system.
Farag, S.F.; Bartheld, R.G.; Habetler, T.G.;
[6]. Wireless Control and Communication to Motor Protection Relays by using an Microprocessor.
Mouton, A.; Smith, C.; Smith, G.E.;
[7]. Integrated metering and protective relay systems.
Zocholl, S.E.;
[8]. Motor protection and control and systems.
Hamilton, K.M.;
[9]. Effect of Single-Phase Reclosing on Industrial Loads.
Sutherland, P.E.; Short, T.A.;
[10]. Design and implementation of FPGA based and microcontroller based current relay.
Shehata, K.; Bahaa, A.; Morad, K.; Sharaf, A.;
[11]. Envelope detector phase loss.
Hessemer, R.A., Jr.;
[12]. Thermal model based digital relaying algorithm for induction motor protection.
Abou-El-Ela, M.S.; Megahed, A.I.; Malik, O.P.;
[13]. Advanced motor protection and communications with solid state motor protective devices.
Alwin, P.E.;
[14]. Integrated metering and protective relay systems-large drive motor applications.
Zocholl, S.E.;
[15]. The universal overcurrent relay.
Schweitzer, E.O., III; Zocholl, S.E.;
[16]. Complete current-based induction motor con***ion monitoring: stator, rotor, bearings, and load.
Habetler, T.G.; Harley, R.G.;
[17]. Fundamentals of a motor thermal model and its applications in motor protection.
Venkataraman, B.; Godsey, B.;
[18]. Microcontroller performance for DC motor speed control system.
Ali, Y.S.E.; Noor, S.B.M.;
[19]. A new intelligent power module with microprocessor compatible analog current feedback, control input, and status output signals.
Motto, E.R.; Donlon, J.F.;
[20]. Microprocessor motor protection relay.
Lacroix, B.; Clegg, D.;

@bke3: Đã post tliệu lên rồi. Bạn post y.cầu trùng lặp và sai tương đối nhiều. Kô hiểu bạn có đọc hết các t.liệu lấy về kô. Mình nghĩ bạn nên đọc cho kỹ trước khi post y.cầu nhé.
Thân
nghichnham

Chào bác nghichnham,
Làm phiền bác tải giúp tôi thêm một số tài liệu như sau:
1. Autonomous vision-based pose control of mobile robots with tele-supervisionWen-Chung Chang; Shu-An Lee;
Control Applications, 2004. Proceedings of the 2004 IEEE International Conference on
(Tạm dịch: Khả năng tự điều khiển của các robot di động dựa trên sự quan sát)
2. Mobility of a mobile robot
Takahashi, H.; Morisawa, M.; Ohnishi, K.;
Advanced Motion Control, 2004. AMC ''04. The 8th IEEE International Workshop on
(Tạm dịch: Sự chuyển động của các robot di động)
3. Mobile robot guidance control with nonlinear observer based state estimation
Matsumoto, N.; Toyoda, A.; Ito, S.;
Intelligent Robots and Systems ''93, IROS ''93. Proceedings of the 1993 IEEE/RSJ International Conference on
Volume 3, 26-30 July 1993 Page(s):2264 - 2271 vol.3
(Tạm dịch: Điều khiển dẫn đường robot di động bằng bộ quan sát phi tuyến dựa trên sự ước lượng trạng thái)
4. A sensor-based navigation for a mobile robot using fuzzy logic and reinforcement learningHee Rak Beom; Hyung Suck Cho;
Systems, Man and Cybernetics, IEEE Transactions on
Volume 25, Issue 3, March 1995 Page(s):464 - 477
(Tạm dịch: Định vị cho robot di động sử dụng logic mờ và phương pháp học củng cố)
Cám ơn bác nghichnham rất nhiều,
vantho2008.

Bac nghich nham ạh, em đã load được tai lieu trên rồi. Em cảm ơn bác nhiều. Em nhờ bác down giúp em các tiêu chuẩn sau với ah:
(1) IEEE Std 1010-2006: IEEE Guide for Control of Hydroelectric Power Plants
(2) IEEE Std 1159.3-2003: IEEE Recommended Practice for the Transfer of Power Quality Data
(3) IEEE Std 1184-2006: IEEE Guide for Batteries for Uninterruptible Power Systems
(4) IEEE Std 1374-1998: IEEE Guide for Photovoltaic Power System Safety
(5) IEEE Std 1513-2001: IEEE Recommended Practice for Qualification of Concentrator
(6) IEEE Std 11-2000: IEEE Standard for Rotating Electric Machinery for Rail and Road Vehicles
(7) IEEE Std 62.2-2004: IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus-Electrical Machinery
(8) IEEE Std 112-2004: IEEE Standard Test Procedure for Polyphase Induction Motors and Generators.
(9) IEEE Std 115-1995: IEEE Guide: Test Procedures for Synchronous Machines, Part 1--Acceptance and Performance Testing, Part II--Test Procedures and Parameter Determination for Dynamic Analysis
(10) IEEE Std 286-2000 (R2006): IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
(11) IEEE Std 620-1996 (R2003): IEEE Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
(12) IEEE C37.90-2005: IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
(13) IEEE C37.90-2005: IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus

@: vanthao2008, Ute: đã download t.liệu cho các bạn rồi.
vanthao chịu khó để ý lại trc khi post nhé, tên t.liệu và tgiả hay bị dính vào nhau đấy.
Ute post t.liệu [12] và [13] giống hệt nhau ???
Gudluck!
nghichnham

Chao bac nghichnham!
Nho bac giup ho em down mot so tai lieu
Cross-phase modulation in fiber links with multiple opticalamplifiers and dispersion compensators
http://ieeexplore.ieee.org/Xplore/login.jsp?url=/iel1/50/10352/00485582.pdf?arnumber=485582
Dependence of cross-phase modulation on channel number in fiber WDM systems
http://ieeexplore.ieee.org/iel1/50/7266/00293982.pdf?tp=&arnumber=293982&isnumber=7266
Effect of the cross-phase modulation on WDM optical systems: analysis of fiber propagation
http://ieeexplore.ieee.org/iel5/68/19834/00917833.pdf?tp=&arnumber=917833&isnumber=19834
Analysis of the cross-phase modulation effect in WDM optical systems
http://ieeexplore.ieee.org/iel5/68/19539/00903215.pdf?tp=&arnumber=903215&isnumber=19539
Em cam on bac nhieu nhieu!!!

@nguyentrongtoan: Đã upload tài liệu cho bạn rồi.
Thân
nghichnham

@nghichnham.
Hien tai minh dang lam de tai luan van lien quan den RADAR. Mong duoc anh giup do download du`m:
Wide-bandwidth mobile radar for ISAR/SAR radar imaging
Mackenzie, J.D.; Brown-Kenyon, E.J.
Spatial diversity in radars-models and detection performance
Fishler, E.; Haimovich, A.; Blum, R.S.; Cimini, L.J., Jr.; Chizhik, D.; Valenzuela, R.A.
Airborne ground moving target indication using non-side-looking antennas
Nohara, T.J.; Weber, P.; Premji, A.; Bhattacharya, T.
Systems and processing considerations for consumer radar applications
Simmons, I.M.
Radar vision
Haykin, S.
High-resolution radar imagery of the Mirage III aircraft
Zyweck, A.; Bogner, R.E.
Features of ultrawideband radar projecting
Immoreev, I.; Vovshin, B.
Ultra-wideband impulse radar
Wheeler, P.; Daniels, D.J.
Radar waveform synthesis method--A new radar detection scheme
Kun-Mu Chen
Role of radar in microwaves
Skolnik, M.
Waveform design principles for automotive radar systems
Rohling, H.; Meinecke, M.-M.
Real-time radar signal simulation for the ground based radar for national missile defense
Mahafza, B.; Welstead, S.; Champagne, D.; Manadhar, R.; Worthington, T.; Campbell, S.
Computer modelling of ground clutter in airborne radar
Browning, D.J.; Summers, J.E.

Gui anh nghichnham. Anh download du`m minh nhe. Cam on anh.
Sliding Mode Based Position Control of a Flexible-Link Arm
Arisoy, A.; Gokasan, M.; Bogosyan, O.S.
Vibration suppression and disturbance rejection control of a flexible link arm
Matsuoka, M.; Murakami, T.; Ohnishi, K.
Tip position control of a flexible-link arm
Arisoy, A.; Gokasan, M.; Bogosyan, O.S.
Partial feedback linearization control of a single flexible link robot manipulator
Arisoy, A.; Gokasan, M.; Bogosyan, O.
Improved measurement/estimation technique for flexible link robot arm control
Lin, J.; Lewis, F.L.

@tudonghoa: đã upload tài liệu bạn y.cầu ở post đầu. Lần sau bạn chú ý đánh số thứ tự nhé, vì mình rất dễ nhầm lẫn hay bỏ sót.
Thân
nghichnham