Tieu chuan IEEE - Institute of Electrical and Electronics Engineers cho thiết kế máy

Tieu chuan IEEE - Institute of Electrical and Electronics Engineers cho thiết kế máy

Có ai gặp vấn đề về điện khi thiết kế máy, các tiều chuẩn sau đây có thể giúp đựợc bạn.

1010-1987 Guide for Control of Hydroelectric Power Plants.pdf
1012 - 2004 IEEE Standard for Software Verificiation and Validation.pdf
1013-2000 IEEE Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) Systems.pdf
1015-1997 Blue Book - IEEE Recommended Practice for Applying Low-Voltage Circutbreakers Used in Industrial & Commerical Power Systems.pdf
1016-1998 - Recommended Practice for Software Design Descriptions.pdf
1031-2000 IEEE Guide for the Functional Specification of Transmission Static Var Compensators.pdf
1036-1992 IEEE Guide for Application of Shunt Power Capacitors.pdf
1042-1987 - Guide to Software Configuration Management.pdf
1048-2003 IEEE Guide for Protective Grounding of Power Lines.pdf
1050-1996 Guide for instrumentation control equipment control in generating stations.pdf
1058-1998 Standard For Software Project Management Plans.pdf
1063-2001 IEEE Standard For Software User Documentation.pdf
1068-1990 IEEE Recommended practice for the repair and rewinding of motors for the petrol and chemical industry.pdf
1074-1997 - Standard for Developing Software Life Cycle Processes.pdf
1076-2002 Standard VHDL Language Reference Manual.pdf
1076.1-1999 IEEE standard VHDL Analog & Mixed-Signal Extensions.pdf
1076.6-1999 IEEE Standard for VHDL Register Transfer Level (RTL) Synthesis.pdf
1084-1986 - Standard Glossary Of Mathematics of computing terminology.pdf
1095-1989 IEEE Guide for Installation of Vertical Generators and Generator. Motors for Hydroelectric Applications.pdf
11-2000 IEEE Standard for Rotating Electric Machinery for Rail and Road Vehicles.pdf
1100-2005 Emerald Book - IEEE Recommended Practice for Powering and Grounding Electronic Equipment.pdf
1110-2002 Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses.pdf
112-2004 IEEE Standard Test Procedure for Polyphase Induction Motors and Generators.pdf
1120-1990 Ieee Guide To The Factors To Be Considered In The Planning, Design, And Installation Of Submarine Power And Communications Cables.pdf
1124-2003 - IEEE Guide for Analysis and Definition of DC Side Harmonic Performance of HVDC Transmission Systems.pdf
114-2001 IEEE Standard Test Procedure For Single-Phase Induction Motors.pdf
1143-1994 IEEE guide on shielding practice for low voltage cables.pdf
1149.1-2001 IEEE Standard Test Access Port and Boundary-Scan Architecture.pdf
1149.5-1995 IEEE Standard for Module Test and Maintenance Bus (MTM-Bus) Protocol.pdf
115-1995 IEEE Guide Test Procedures for Synchronous Machines.pdf
1159-1995 IEEE Recommended Practice for Monitoring Electric Power Quality.pdf
1174-2000 IEEE standard serial interface for programmable instrumentation.pdf
120-1989 IEEE Master Test Guide for Electrical Measurements in Power Circuits.pdf
1207-2004 IEEE Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units.pdf
1210-1996 IEEE standard tests for determining compatibility of cable-pulling lubricants with wire and cable.pdf
12207-2 Standard for Information Technology.pdf
12207.2-1997 - Software Lifecycle Processes.pdf
1222-2004 IEEE Standard For All-Dielectric Self-Supporting Fiber Optic Cable.pdf
1233-1998 Guide For Developing System Requirements Specifications.pdf
1235-2000 IEEE guide for the properties of identifiable jackets for underground power cables and ducts.pdf
1240-2000 IEEE Guide for the Evaluation of the Reliability of HVDC Converter Stations.pdf
1241-2000 IEEE standard for terminology and test methods for analog-to-digital converters.pdf
1243-1997 IEEE Design Guide For Improving The Lightning Performance Of Transmission Lines.pdf
1248-1998 IEEE Guide for the Commissioning of Electrical Systems in Hydroelectrical Power Plants.pdf
1255-2000 IEEE guide for evaluation of torque pulsations during starting of synchronous motors.pdf
1268-1997 IEEE Guide for the Safe Installation of Mobile Substation Equipment.pdf
1276-1997 IEEE Guide for the Application of High Temperature Insulation Materials in Liquid-Immersed Power Transformers.pdf
1284-2000 IEEE Standard Signaling Method for a Bidirectional Parallel Peripheral Interface for Personal Computers.pdf
1291-1993 IEEE Guide for Partial Discharge Measurement in Power Switchgear.pdf
1312-1993 IEEE Standard Preferred Voltage Ratings for AC Electrical Systems and Equipment Operating at Voltages Above 230 kv Nominal.pdf
1313.2-1999 Ieee Guide For The Application Of Insulation Coordination.pdf
1333-1994 IEEE guide for installation of cable using the guided boring method.pdf
1346-1998 RP for Evaluating Electric Power System Compatibility with Electronic Process Equipment.pdf
1349-2001 IEEE Guide for the Application of Electric Motors in Class I, Division 2 Hazardous (Classified) Locations.pdf
1361-2003 Ieee Guide For Selection, Charging, Test, And Evaluation Of Lead-Acid Batteries Used In Stand-Along Photovoltaic (Pv) Systems.pdf
1364-2001 IEEE Standard Verilogr Hardware Description Language.pdf
1364.1-2002 IEEE Standard for Verilogr Register Transfer Level Synthesis.pdf
1366-2003 Ieee Standard Guide For Power Distribution Reliability.pdf
1374-1998 IEEE Guide for Photovoltaic Power System Safety.pdf
1375-1998 IEEE Guide for the Protection of Stationary Batteries.pdf
1378-1997 IEEE Guide for Commissioning High-Voltage Direct-Current (HVDC) Converter Stations and Associated Transmission Systems.pdf
1387 3 1996 POSIX System Administration Part 3 User And Group Account Administration (1997); BM OCR 6.0-2.5.pdf
1390-1995 Standard For Utility Telemetry Architecture.pdf
1394-1995 standard for high performance serial bus.pdf
1394b-2002 IEEE Standard for a High-Performance Serial Bus-Amendment 2.pdf
1402-2000 - IEEE Guide for Electric Power Substation Physical and Electronic Security.pdf
141-1993 RED BOOK - Practice for Electric Power Distribution for Industrial Plants.pdf
142-1991 Green Book - IEEE Recommended Practice For Grounding Of Industrial And Commercial Buildings.pdf
1434-2000 IEEE Trial-Use Guide To The Measurement Of Partial Discharges In Rotating Machinery.pdf
1451.1-1999 IEEE Standard for a Smart Transducer Interface for Sensors and Actuators-Network Capable Application Processor (NCAP) Information Model.pdf
1471-2000 - Ieee Recommended Practice For Architectural Description Of Software-Intensive Systems.pdf
149-1979 Test Procedures for Antennas.pdf
1547-2003 IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems.pdf
1588-2002 IEEE Standard for a Precision.Clock.Synchronization.Protocol.for.Networked.Measurement.and.Control.Systems.pdf
1800-2005 SystemVerilog IEEE Std .pdf
241-1990 Gray Book - IEEE Recommended Practice for Electric Power Systems in Commercial Buildings.pdf
242-2001 IEEE Recommended Practice for Protection and Coordination of Industrial and Commerical Power System.pdf
252-1995 IEEE standard test procedure for polyphase induction motors having liquid in the magnetic gap.pdf
286-2000 IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation.pdf
315A-1986 - Supplement To Graphics Symbols For Electrical And Electronics Diagrams.pdf
32-1972 IEEE Standard requirements, terminology and test procedure for neutral grounding devices.pdf
399-1997 BROWN BOOK - Recommended Practice For Industrial And Commercial Power System Analysis.pdf
4-1995 IEEE Standard Techniques For High-voltage Testing.pdf
421.3-1997 IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines.pdf
43-2000 IEEE recommended practice for testing insulation resistance of rotating machinery.pdf
432-1992 Guide for Insulation Maintenance for Rotating Electrical Mach.pdf
434-1973(Ieee Guide For Functional Evaluation Of Insulation Systems For Large High-Voltage Machines).pdf
436-1991 Guide for making Corona (Partial Discharge) Measurements on Electronics Transformers.pdf
446-1995 Orange Book IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications.pdf
487-2000 IEEE recommended practice for the protection of wire-line communication facilities serving electric supply locations.pdf
488.1-1987 IEEE Standard Digital Interface for Programmable Instrumentation.pdf
493-1997 Recommended practice of the design of reliable industrial and commercial power system.pdf
4a - 2001 - Amendment to IEEE Standard Techniques for High-Voltage Testing.pdf
519-1992 Recommended Practices and Requirements for Harmonic Control in electrical power system.PDF
522-1992 IEEE guide for testing turn-to-turn insulation on form-wound stator coils for alternating-current rotating electric machines.pdf
524-2003 IEEE Guide to the Installation of Overhead Transmission Line Conductors.pdf
525-1992 IEEE Guide for the Design and Installation of Cable Systems in Substations.pdf
551-2006 Violet book IEEE Recommended Practice for Calculating Short- Circuit Currents in Industrial and Commercial Power Systems.pdf
602-1996 -WHITE BOOK-Recommended Practice for Electric Systems in Health Care Facilities.pdf
605-1998 IEEE Guide for the Design of Substation Rigid-Bus Structures.pdf
610.12-1990 IEEE Standard Glossary of Software Engineering Terminology.pdf
610.5-1990 - Standard Glossary of Data Management Terminology.pdf
62-1958 IEEE Recommended Guide For Making Dielectric Measurements In The Field.pdf
62-1995 IEEE guide for diagnostic field testing of electric power apparatus - part 1 oil filled power transformers, regulators, and reactors.pdf
62.2-2004 IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery.pdf
635-2003(IEEE guide for selection and design of aluminum sheaths for power cables).pdf
644-1994 IEEE Standard Procedure for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines.pdf
67-1990 IEEE guide for operation and maintenance of turbine generators.pdf
730-2002 - Standard for Software Quality Assurance Plans.pdf
730.1-1995 IEEE Guide for Software Quality Assurance Planning.pdf
739-1995 Bronze Book - IEEE Recommended Practice For Energy Management In Industrial And Commercial Facilities.pdf
739-1995 IEEE Recommended Practice For Energy Management In Industrial And Commercial Facilities.pdf
762-1987 IEEE Standard Definitions For Use In Reporting Electric Generating Unit Reliability, Availability, And Productivity.pdf
80-2000 IEEE Guide for Safety in AC Substation Grounding.pdf
81-1983 IEEE Guide For Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System.pdf
81-1983 IEEE Guide For Measuring Earth Resistivity.pdf
81.2-1991 IEEE Guide To Measurement Of Impedance And Safety Characteristics Of Large, Extended Or Interconnected Grounding Systems.pdf
810-1987 IEEE Standard for Hydraulic Turbine and Generator Integrally Forged Shaft Couplings and Shaft Runout Tolerances.pdf
82-2002 IEEE standard test procedure for impulse voltage tests on insulated conductors.pdf
828-1998 - Standard for Software Configuration Management Plans.pdf
829-1998 IEEE Standard for Software Test Documentation.pdf
830-1998 Recommended Practice for Software Requirements Specifications.pdf
837-2002 Standard for Qualifying Permanent Connections Used in Substation Grounding.pdf
841-2001 IEEE Standard for Petroleum and Chemical Industry-Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors-Up to and Including
857-1996 IEEE Recommended Practice for Test Procedures for High Voltage Direct Current Thyristor Valves.pdf
902-1998 -YELLOW BOOK-Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems.pdf
930-1987 IEEE Guide For The Statistical Analysis Of Electrical Insulation Voltage Endurance Data.pdf
946-1992 IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations.pdf
95-2002 IEEE recommended practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage.pdf
977 1991 Guide to Installation of Foundations for Transmission Line Structures.pdf
C135.1-1999 IEEE Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction.pdf
C135.20-1998 IEEE Standard for Zinc-Coated Ferrous Insulator Clevises for Overhead Line Construction.pdf
C135.61-1997 IEEE Standard for Testing of Overhead Transmission and Distribution Line Hardware.pdf
C37.010-1999 IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis.pdf
C37.011 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis.pdf
C37.012-1979 Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis.pdf
C37.013-1997 IEEE Standard for AC High-Voltage Generator Circuit Breaker Rated on a Symmetrical Current Basis.pdf
C37.04-1999 IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis.pdf
C37.06.1 ANSI Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated "Definite Purpose for Fast Transient Recove.pdf
C37.081-1981 IEEE Guide for Synthetic Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current basis.pdf
C37.082-1982 Ieee Standard Methods For The Measurement Of Sound Pressure Levels Of Ac Power Circuit Breakers.pdf
C37.083-1999 IEEE Guide to Synthetic Capacity Current Switching Test of AC High-Voltage Circuit Breakers.pdf
C37.09 IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis.pdf
C37.1-1994 IEEE Standard Definition, Specification, and Analysis of Systems Used for Supervisory Control, Data Acquisition, and Automatic Control.pdf
C37.10-1995 IEEE Guide for Diagnostics and Failure Investigation of Power Circuit Breakers.pdf
C37.10.1-2000 - IEEE Guide For The Selection Of Monitoring For Circuit Breakers.pdf
c37.100-1992 IEEE standard definitions for power switchgear.pdf
C37.101-1993 IEEE Guide for Generator Ground Protection.pdf
C37.102-1995 Ieee Guide For Ac Generator Protection.pdf
C37.104-2002 IEEE Guide for Automatic Reclosing of Line Circuit Breakers for AC Distribution and Transmission Lines.pdf
C37.105-1987 IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations.pdf
C37.106-1987 Guide for Abnormal Frequency Protection.pdf
C37.108 - 2002 Guide For The Protection Of Network Transformer.pdf
C37.109-1988 Ieee Guide For The Protection Of Shunt Reactors.pdf
C37.11-1997 IEEE Standard Requirements for Electrical Control for High-Voltage Circuit Breakers Rated on A Symmetrical Current Basis.pdf
C37.110-1996 - IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes.pdf
C37.111-1999 IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems.pdf
C37.113-1999 Guide for Protective Relay Applications to Transmission Line Protection.pdf
C37.123-1996 IEEE Guide to Specifications for Gas Insulated, Electric Power Substation Equipment.pdf
C37.18 - 1979 IEEE Standard Enclosed.Field.Discharge.Circuit.Breakers.for.Rotating.Electric.Machinery.pdf
C37.2-1991 IEEE Standard Electrical Power System Device.pdf
C37.2-1996 IEEE Standard Electrical Power System Device Function Numbers and Contact Designations.pdf
C37.20.1-2002 IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear.pdf
C37.20.6-1997 IEEE Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices used in Enclosures.pdf
C37.20.7-2001 IEEE Guide for Testing Medium-Voltage Metal-Enclosed Switchgear for Internal Arcing Faults.pdf
C37.21-1985 Ieee Standard For Control Switchboards.pdf
C37.23 STANDARD FOR METAL-ENCLOSED BUS.pdf
C37.24-2003 IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear.pdf
C37.26-2003 Ieee Standard Guide For Methods Of Power-Factor Measurement For Low-Voltage Inductive Test Circuits.pdf
C37.27 IEEE standard application guide for low-voltage AC non-integrally fused power circuit breakers (using separately mounted current-limiting fuses).pdf
C37.29 IEEE Standard For Low-voltage AC Power Circuit. Protectors Used In Enclosures.pdf
C37.30-1997 IEEE standard requirements for high-voltage switches.pdf
C37.32-2002 American National Standard for High Voltage Switches, Bus Supports,and Accessories Schedules of Preferred Ratings, Construction Guidelines, and
C37.34-1994 Standard test code for a high-voltage air switches.pdf
C37.35-1995 IEEE guide for the application, installation, operation, and maintenance of high-voltage air disconnecting and interrupter switches.pdf
C37.40b-1996 IEEE standard service con***ions and definitions for external fuses for shunt capacitors. Supplement to IEEE Std C37.40-1993.pdf
C37.41-1998 IEEE Standard Design Tests for High-voltages Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and
SI 10-2002 American National Standard for Use of the International System of Units (SI) The Modern Metric System.pdf

Over 20000 words, se goi tiep sau.
Khánh Vũ
0913813415

Continue here:
C37.48 IEEE Guide for the Application,Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting
C37.59-2002 Ieee Standard Requirements For Conversion Of Power Switchgear Equipment.pdf
C37.63-1997 IEEE standard requirements for overhead, pad-mounted, dry-vault, and submersible automatic line sectionalizers for AC systems.pdf
C37.90-1989 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus.pdf
C37.90.3-2001 IEEE Standard Electrostatic Discharge Tests for Protective Relays.pdf
C37.91 Guide for Power Transformer Protection.pdf
C37.93-2004 IEEE Guide for Power System Protective Relay Applications of Audio Tones Over Voice Grade Channels.pdf
C37.95-2002 - IEEE Guide For Protective Relaying Of Utility-Consumer Interconnections.pdf
C37.96 Guide for AC Motor Protection.pdf
C37.99-2000 IEEE Guide for the Protection of Shunt Capacitor Banks.pdf
C50.12-2005 Salient-Pole 50 Hz and 60 Hz Synchronous.pdf
C57.100-1999 Ieee Standard Test Procedures For Thermal Evaluation Of Oil-Immersed Distribution Transformers.pdf
c57.104-1991 ieee guide for the interpretation of gases generated in oil-immersed transformers.pdf
C57.105-1978 (R1999) IEEE Guide for Application of Transformer Connections in Three-Phase Distribution Systems.pdf
C57.106-2002 Ieee Guide For Acceptance And Maintenance Of Insulating Oil In Equipment.pdf
C57.109 1993 - Liquid Transformers Through-Fault-Current Duration.pdf
C57.110-1998 (R2004) IEEE Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents.pdf
C57.113-1991 (r2002) Ieee Guide For Partial Discharge Measurement In Liquid-Filled Power Transformers And Shunt Reactors.pdf
C57.117-1986 IEEE Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power Systems.pdf
C57.12.00-2000 IEEE Standard General Requirements for--Liquid-Immersed Distribution, Power, and Regulating Transformers.pdf
C57.12.32-2002 IEEE Standard for Submersible Equipment--Enclosure Integrity.pdf
C57.12.56-1986 IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers.pdf
C57.12.59-2001 IEEE Guide for Dry-Type Transformer Through-Fault Current Duration.pdf
C57.12.70-2000 IEEE Standard Terminal Markings and Connections for Distribution and Power Transformers.pdf
C57.12.90-1999 IEEE Standard for Liquid-Immersed Distribution, Power, and Regulating Transformers.pdf
C57.12.91.-.2001 IEEE.Standard.Test.Code.for.Dry.-.Type.Distribution.anad.Power.Transformers.pdf
C57.127-2000 IEEE Trial-Use Guide for the Detection of Acoustic Emmissions from Partial Discharges in Oil-Immersed Power Transformers.pdf
C57.129-1999 IEEE Standard General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers.pdf
C57.13-1993 - Ieee Requirement For Instrument Transformer.pdf
C57.13.3-1993 Guide for grounding instrum.pdf
C57.144-2004 Ieee Guide For Metric Conversion Of Transformer Standards.pdf
C57.15-1999 IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage and Induction-Voltage Regulators.pdf
C57.18.10-1998 IEEE Standard Practices and Requirements for Semiconductor Power Rectifier Transformers.pdf
c57.91 IEEE Guide for Loading Mineral-Oil Immersed Transformers.pdf
C57.98-1993 IEEE Guide for Transformer Impulse Tests (An errata is available).pdf
C62.11-1999 IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (larger 1 kV).pdf
C62.2-1987 (r1994) Ieee Guide For The Application Of Gapped Silicon-Carbide Surge Arresters For Alternating Current Systems.pdf
C62.21-2003 IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater.pdf
C62.22-1997 Ieee Guide For The Application Of Metal-Oxide Surge Arresters For Alternating-Current Systems.pdf
C62.22.1-1996 IEEE Guide for the Connection of Surge Arresters to Protect Insulated Shielded Electric Power Cable Systems.pdf
C62.32-2004 IEEE Standard Test Methods for Low-Voltage Air Gap Surge-Protective Device Components (Excluding Valve and Expulsion Types).pdf
C62.33-1982 (R1994) IEEE Standard Test Specifications for Varistor Surge-Protective Devices.pdf
C62.34 1996 Ieee Standard For Performance Of Low-Voltage Surge-Protective.pdf
C62.35-1987 (R1993) IEEE Standard Test Specifications for Avalanche Junction Semiconductor Surge Protective Devices.pdf
C62.36-2000 IEEE Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits.pdf
C62.37-1996 (r2002) Ieee Standard Test Specification For Thyristor Diode Surge Protective Devices.pdf
C62.37.1-2000 IEEE Guide for the Application of Thyristor Surge Protective Devices.pdf
c62.38-1994 Ieee Guide On Electrostatic Discharge (Esd); Esd Withstand Capability Evaluation Methods (For Electronic Equipment Subassemblies).pdf
C62.41-1991 IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.pdf
C62.41.2-2002 IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits.pdf
C62.45-2002 IEEE Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and Less) AC Power Circuits.pdf
C62.47 IEEE Guide on Electrostatic Discharges (ESD) - 1993.pdf
C62.48-1995 IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices.pdf
C62.64-1997 IEEE Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits.pdf
c62.92.2 1989 - Application Of Neutral Grounding- Part Ii-Synchronous Generator Systems.pdf
C62.92.3-1993 Neutral rounding in Electrical Utility Systems, Part III--Generator Auxiliary Systems.pdf
C63.12 - 1999 - American National Standard Recommended Practice for Electromagnetic Compatibility Limits.pdf
C63.22-2004 - American National Standard Guide for Automated Electromagnetic Interference Measurements.pdf
ISO-IEC 17799 2005.pdf
Medium Voltages Circuit Breaker Guide - ANSI vs IEC Comparison.pdf
Meeting IEEE 519-1992 Harmonic Limits.pdf
Overview of IEEE Std 91-1984.pdf
Khánh Vũ
0913813415

bạn gửi mail cho mình xin bản IEEE std 112 -1996 và IEEE std 114-2000 với, xin cảm ơn bạn nhiều.
Mail: noncv25@gmail.com