Xe môtô phân khối lớn

Một chiếc moto độc nhất vô nhị trê thế giới:

Công ty Đức chuyên sản xuất máy cưa dùng động cơ đốt trong Dolman thành lập năm 1927 là nhà tiên phong trong lĩnh vực máy móc công nghiệp ở Châu Âu, nên cũng không có gì ngạc nhiên khi họ dùng công nghệ máy cưa của mình để sản xuất xe moto phân khối lớn.
Sử dụng 24 (vâng, 24) động cơ máy cưa Dolman tạo nên một con quái vật được gọi là chiếc moto Dolmette.
Hai mươi bốn động cơ Dolman nối liền với nhau và sử dụng bộ truyền động 5 cấp của Harley Dadvison bằng một hệ thống đặc biệt làm nên một cỗ máy gồm 24 cylinder 2 thì với tổng cộng 1900 phân khối, chúng đồng thời họat động tạo ra công suất lên đến 170 HP!!!
Đai truyền động của nó đây:
Lần đầu khi được đưa ra chạy thử ở đường đua Contidrrom ở gần Hannover, chiếc Dolmette đã vượt qua tốc độ tương đương 210khm/h chỉ với số 3 !!! Nó đang là đề tài để dân chơi xe ở Châu Âu bàn tán. Chỉ nhân nút khởi động, tiếng rền của 24 động cơ cũng đủ làm bạn vỡ ngực.

Chào các bác , em là forumer mới đây . Thú thật nge các bác bàn về xe mà sướng cả mắt . Nhân tiện em cũng đang muốn có một con xe phân khối lớn đây , dáng em nhỏ nên chỉ đi tầm < 150 thôi . Hôm trước qua chợ DV thấy có con Kawasaki 150 phân khối dang khá thể thao _ mà cả chợ chỉ có một con thôi . Xin hoi bác nào biết nhiều về xe PKL một tí ? Con ấy còn chạy nổi không vậy , nghe máy nổ thì còn ngon . Em có hỏi chơi thấy nó thách 10T _ đắt quá _ không biết mua đúng giá thi bao nhiêu nhỉ ? Nhân tiên bác nao sanh xe thì cho xin tí thông tin về dòng xe này luôn

Chào các bác , em là forumer mới đây . Thú thật nge các bác bàn về xe mà sướng cả mắt . Nhân tiện em cũng đang muốn có một con xe phân khối lớn đây , dáng em nhỏ nên chỉ đi tầm < 150 thôi . Hôm trước qua chợ DV thấy có con Kawasaki 150 phân khối dang khá thể thao _ mà cả chợ chỉ có một con thôi . Xin hoi bác nào biết nhiều về xe PKL một tí ? Con ấy còn chạy nổi không vậy , nghe máy nổ thì còn ngon . Em có hỏi chơi thấy nó thách 10T _ đắt quá _ không biết mua đúng giá thi bao nhiêu nhỉ ? Nhân tiên bác nao sanh xe thì cho xin tí thông tin về dòng xe này luôn

Oái! Cái chủ đề này thế nào mà lại rơi tụt xuống trang 2
Có chiếc xe này nhìn thoáng cứ tưởng 1 chú Virago mới chết chứ!
Nhưng xin thưa nó là 1 em Harley 1450cc đấy nhé.
Thông số của nó đây, mời các tham khảo.
The Low Rider® model takes to the street as long, low and restless as ever. The profile is unmistakable, beginning up front with the raked-out fork, low-rise pullback handlebar and stretched tank. Downward and to the back, there are frame-mounted highway pegs, mid-mounted foot controls and a fat 150mm rear tire. Of course there?Ts the lowered suspension and low-slung seat. Those who like things on the low side will be riding just over 25" off the pavement and grinning ear to ear. That?Ts because everything about this riding position feels good. So it was only right that we give it the internal combustion to match. The Low Rider rides high on power with a wrinkle black and chrome Twin Cam 88® engine, in carb or EFI. It?Ts rubber-mounted, so the only thing about you that will ever be restless is your spirit.
------------------------------
SPECIFICATIONS:
DIMENSIONS
Length 2387.6 mm
Seat Height
Laden(1) 640.1 mm
Unladen 665.5 mm
Ground Clearance 116.8 mm
Rake Steering Head/Trail 32.0º / 129.5 mm
Wheelbase 1663.7 mm
Fuel Capacity(2) 17.8 L
Oil Capacity 2.8 L
Weight
Dry Weight 283.0 kg
Running Order 298.0 kg
POWERTRAIN
Engine(3) Twin Cam 88®
Displacement 1450 cm³
Bore x Stroke 95.18 mm x 101.52 mm
Engine Torque(4)(5) 115.0 nm @ 3000 rpm
Fuel System(6) Carburetor
Compression Ratio 8.9:1
Liters per 100 KM(7)

Oái! Cái chủ đề này thế nào mà lại rơi tụt xuống trang 2
Có chiếc xe này nhìn thoáng cứ tưởng 1 chú Virago mới chết chứ!
Nhưng xin thưa nó là 1 em Harley 1450cc đấy nhé.
Thông số của nó đây, mời các tham khảo.
The Low Rider® model takes to the street as long, low and restless as ever. The profile is unmistakable, beginning up front with the raked-out fork, low-rise pullback handlebar and stretched tank. Downward and to the back, there are frame-mounted highway pegs, mid-mounted foot controls and a fat 150mm rear tire. Of course there?Ts the lowered suspension and low-slung seat. Those who like things on the low side will be riding just over 25" off the pavement and grinning ear to ear. That?Ts because everything about this riding position feels good. So it was only right that we give it the internal combustion to match. The Low Rider rides high on power with a wrinkle black and chrome Twin Cam 88® engine, in carb or EFI. It?Ts rubber-mounted, so the only thing about you that will ever be restless is your spirit.
------------------------------
SPECIFICATIONS:
DIMENSIONS
Length 2387.6 mm
Seat Height
Laden(1) 640.1 mm
Unladen 665.5 mm
Ground Clearance 116.8 mm
Rake Steering Head/Trail 32.0º / 129.5 mm
Wheelbase 1663.7 mm
Fuel Capacity(2) 17.8 L
Oil Capacity 2.8 L
Weight
Dry Weight 283.0 kg
Running Order 298.0 kg
POWERTRAIN
Engine(3) Twin Cam 88®
Displacement 1450 cm³
Bore x Stroke 95.18 mm x 101.52 mm
Engine Torque(4)(5) 115.0 nm @ 3000 rpm
Fuel System(6) Carburetor
Compression Ratio 8.9:1
Liters per 100 KM(7)

Đền nghị bác khome chịu khó chuyển sang tiếng Việt cho dễ đọc chứ bác làm thế này thì khó cho anh em quá, chỉ đọc được mỗi cái ảnh.

Đền nghị bác khome chịu khó chuyển sang tiếng Việt cho dễ đọc chứ bác làm thế này thì khó cho anh em quá, chỉ đọc được mỗi cái ảnh.

Bác haitrung nên đưa phần hình ảnh này lên trên vào chỗ Gallery ấy, hoặc bác cho luôn cái link để anh em xem luôn bác đỡ vất vả mà lại lõang phần bình luận.

Bác haitrung nên đưa phần hình ảnh này lên trên vào chỗ Gallery ấy, hoặc bác cho luôn cái link để anh em xem luôn bác đỡ vất vả mà lại lõang phần bình luận.

Hôm nọ bác Kasanova đưa con Domette lên hay thật, em lên mạng kiếm thêm được một ít hình.Post len cho các bác coi choi.
PS :
(Em làm biếng dịch ra quá, các bác tự dịch, mà kg dịch cũng chả chết thằng tây nào.Coi hình cũng đủ thích rùi hehe )
To Kasanova : em co post luon cai link to file sound/ movie clips đấy.bác thích thì down về nghe nhé
The engine
What makes the Dolmette unique in engineering terms is its 24-cylinder 2-stroke power plant. Nothing quite like it has been seen before. The combined power of 24 DOLMAR chainsaw engines is fed into to a 5-speed Harley-Davidson transmission by a series of twelve toothed belts.
The engine in question is the one used in the PS-7900 professional chainsaw, which currently boasts the best power-to-weight ratio of any professional petrol chainsaw in the world ?" just 1 kg per PS. In standard trim each of these high-performance air-cooled 79 cc units generates 4.6 kW of power (6.3 PS) at 9500 rpm. A specific output of 59 kW per litre is outstanding for a chainsaw, and the secret lies in DOLMAR?Ts High Performance Combustion (HPC) technology. This term refers to the special design of the six gas exchange ports in combination with the asymmetrical combustion chamber head and the crankcase configuration: the result is a highly efficient combustion cycle with low exhaust emissions.
For use in the Dolmette the engines were tuned and tweaked to deliver 5.2 kW of power (7.1 PS) at 10,000 rpm. Maximum torque delivery is 5.5 Nm at 7,750 rpm. When all 24 are combined, the result is a 24-cylinder power plant with a total displacement of 1.9 litres, a power output of 125 kW (170 PS) and 130 Nm of torque at the centrifugal clutches
The combined power plant
The heart of the combined power plant is the central drive belt casing of aluminium construction. As well as encasing the eleven belts used to couple up the individual engines, it also houses the exhaust ducts for the cooling air. Twelve engines are mounted in two rows of six on either side of the drive belt casing. Each engine is held in place by means of two threaded studs that normally serve to secure the guide bar to the chainsaw power head. The individual motors are coupled together in sets of three by means of a double-sided drive belt, making up eight modules in all. The individual engines are not rigidly connected; instead they deliver their torque through the centrifugal clutch that is a standard feature of every chainsaw.

Through a sequence of three more toothed belts the power of the eight modules is transferred to a single output shaft, which in turn drives the clutch for the 5-speed transmission via a twelfth belt. The toothed belt drive also serves to gear down the speed of the high-revving chainsaw engines in the ratio 3.45 : 1, producing a manageable maximum of 4,500 rpm at the transmission unit. The friction loss that is inevitable with belt drives is less than 10%, which means that the maximum torque available at the transmission input shaft to power the bike is a massive 400 Nm
As a consequence of the non-rigid coupling of the individual engines via their centrifugal clutches, the combined power plant has a self-determining ?" i.e. totally random ?" firing sequence. In this case, because of the way a 2-stroke engine works, there are 24 ignition points during each engine revolution, or roughly one every 15º. In other words, this power plant fires four times more often per revolution that a 12-cylinder 4-stroke engine!
The very high maximum engine speed of over 15,000 rpm and the much lower clutch engagement speed of 4,000 rpm at the centrifugal clutch leaves the engines with an extremely wide usable rev band of over 11,000 rpm. On the higher gearing the Dolmette reaches a speed in excess of 120 kph in first gear, and on low gearing it reaches around 80 kph.
Because a chainsaw is a hand-held tool, keeping weight down to a minimum is naturally a key consideration. So the cylinders and pistons are made from aluminium, while the crankcase is manufactured from the even lighter metal magnesium. This was already a very good start, but the DOLMAR engineers were able to find ad***ional weight savings by machining down the standard magnesium crankcase and stripping out a number of components not needed by the engine in drag-racing mode. By this means they trimmed the weight down from 6.3 kg to a mere 4.5 kg. The combined power plant as a whole, including the transmission, weighs in at a relatively light 188 kg, despite an overall length of 2495 mm.
The belt drive
Another cutting-edge technological feature are the twelve drive belts manufactured by the ContiTech Power Transmission Group. These high-tech components ensure that the power of the 24 chainsaw engines is transferred to the road as efficiently as possible.
Eleven CONTI SYNCHROTWIN® SUPREME double-sided drive belts incorporating a special high-tensile core reinforcement are used to link the 24 chainsaw engines in a serpentine configuration. A 100 mm wide single-sided
CONTI SYNCHROFORCE® SUPREME high-performance drive belt takes care of the final drive.
Because the engines are coupled by means of centrifugal clutches, resulting in a random ignition sequence across the 24-engine array, the engineers at DOLMAR GmbH found themselves entering uncharted territory. No such drive configuration had ever been attempted before. Together with their colleagues at ContiTech they rose to the challenge by developing a drive belt system that transfers the asynchronous power delivery from 24 engines to the back wheel through several transmission stages running at different relative speeds.
Given the asymmetrical nature of the forces acting on the drive belts, the latter need to be engineered to cope with massive loads. The development process was correspondingly lengthy and laborious. In order to reduce the mechanical shocks associated with the asynchronous absorption of stresses, the belts needed to have teeth that were exceptionally resistant to abrasion. Normally this is achieved by making the belt exceptionally rigid and stiff: but in the case of the Dolmette the specification called for a drive belt that was as flexible as possible. So the engineers at ContiTech modified the existing polychloroprene belt and strengthened the bond between the material compound and the core reinforcement, or tension member, pushing the technology close to the limits of manufacturing capability. And in order to make it possible to transfer all this power within the limited space available on a motorcycle, where only very narrow drive belts can be used, the engineers had to push the envelope well beyond the limits established by existing applications.
The chassis
The central element of the frame is the self-supporting drive belt casing with an overall length of 2,495 mm. Bolted onto this is the front section of the frame, constructed from 32 mm tubing. Sitting in the steering head is the Techno Plus front fork, machined from the solid, with telescopic dampers. The bolted-on back fork assembly is likewise constructed from 32 mm tubing and accommodates the back wheel with no suspension travel. The back wheel is a massive 8½? solid disc wheel fitted with a 240/40 - 18? tyre. At the front is a more conventional 3½? aluminium spoked wheel shod with a 120/90 - 18? tyre.
The fully assembled bike measures 3,870 mm from front to back and is 590 mm wide. As the power plant is largely built from aluminium and magnesium, and consequently weighs a modest 188 kg despite its 24 cylinders, the overall weight of the Dolmette has been held down to a touch over 300 kg. This has resulted in a very favourable power-to-weight ratio of just 1.8 kg/PS.
A machine that goes this fast also needs to stop fast. The front wheel is fitted with 292 mm twin disc brakes with 16-piston calipers. The back wheel has a single 292 mm disc teamed with a 4-piston caliper.
Lausitzring
In an exciting speedway duel Andi Feldmann on the DOLMETTE loses by a hair.
On 4 September 2004 the EuroSpeedway in Lausitz was the setting for a gripping race between Andi Feldmann on the DOLMETTE and racing driver Christina Surer in her Abt Audi AS400.
Because the start of the race had been fixed for 5.00 p.m., and Christina Surer was running on a very tight schedule, there was only a 20-minute time slot in which to run the race ?" and that included the time needed to get the DOLMETTE?Ts multiple engines powered up for the start. The intense pace and pressure soon told on the charming pit crew, the ladies?T handball team from Süderbrarup, who only managed to get 20 of the DOLMETTE?Ts 24 engines running. So Andi Feldmann had to make do with the power output from just 20 chainsaw engines ?" a ?omere? 142 PS.

Photo: Rolf Klatt
The drama and stress took their toll of DOLMETTE rider Andi Feldmann too. During test runs in Schleswig and on the Lausitz Eurospeedway, for which unfortunately only two days were available, it became clear that the torque delivery from the 24 engines, even in second gear, is just too much for the back wheel to handle. Consequently the bike suffers from massive wheel-spin. For this reason Andi Feldmann left the starting line in third gear, and with power output already down by four engines he simply couldn?Tt get the standing-start acceleration necessary.
And then there was his opponent. Christina Surer is a highly experienced racing driver with ice-cool nerves.
At the starting gun she needed only a few milliseconds to put down all the Audi?Ts 400 horsepower onto the tarmac. Andi Feldmann, on his 142 PS DOLMETTE, needed nearly half a second more. With his engines revved up to full power Andi managed to make up some lost ground, but he was unable to prevent Christina Surer from snatching victory by a whisker.
Một số hình ảnh :
Multimedia Links
Domette Sound
http://www.dolmette.com/html/bilder/ton_dolmette.mp3
Domete Clips
http://www.dolmette.com/html/22_127_ENG_HTML.htm
Có đoạn khởi động xe hay phết, 2 người 2 bên đứng giựt dây khởi động cho từng cái ..cưa
Được sivextien sửa chữa / chuyển vào 13:19 ngày 08/11/2004