Xy lanh khí nén Parker chính hãng

CÔNG TY TNHH THƯƠNG MẠI KỸ THUẬT HƯNG GIA PHÁT

Địa chỉ : 58 Đường số 45 , Phường 14 , Quận Gò Vấp , T/PHCM , Việt Nam.

ĐT : +84 ( 08 ) 38958795 - Fax : + 84 ( 08 ) 38958796

Email : info@hgpvietnam.com - Website : www.hgpvietnam.com

Mr Giàu : 0938 906 663

Email: giau@hgpvietnam.com




Công ty chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như : Xy lanh khí nén Parker vietnam, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump....

Xy lanh khí nén Parker được ứng dụng rộng rãi trên thế giới.

Xy lanh khí nén Parker chính hãng

Xy lanh khí nén Parker chính hãng

Xy lanh khí nén Parker chính hãng










Model

Parker vietnam Single Acting Pneumatic Cylinders With Built In Hydro Pneumatic Intensifier - VB Series / Parker Pneumatic - Europe

Parker vietnam The VB actuator is a single acting pneumatic clamp cylinder with built-in oleo pneumatic intensifier producing a force up to 2100 daN. Compact and easy to install for clamping, holding and riveting applications

Parker vietnam Pneumatic Thrust Cylinders, Diaphragm Type - C0D Series / Parker Pneumatic - Europe

Parker vietnam C0D thrust cylinders are linear actuators with a diaphragm piston. 6 versions including single and double acting, provide forces from 3000 to 12000N (at 6 bar). Suitable for clamping, riveting and punching applications. Strokes up to 50mm

Parker vietnam Compact Pneumatic Cylinders, Short Stroke - C05 Series / Parker Pneumatic - Europe

Parker vietnam The C05 actuator is available in double acting bores Ø12 to Ø63mm and C05S in single acting bores Ø8 to Ø63mm. With stainless steel piston rod as standard and corrosion resistant body is suitable for clamping and locking operations.

Parker vietnam Pneumatic Thrust Cylinders, Piston Type - C0P Series / Parker Pneumatic - Europe

Parker vietnam C0P thrust cylinders are linear actuators for a high force to size ratio. 8 versions including single and double acting, provide forces from 1600 to 25000N (at 6 bar). Suitable for clamping, riveting and punching applications. Strokes up to 100mm.

Parker vietnam Air Knocker Cylinder Improves Bulk Material Handling- 'JAK-50 & JAK-80'

Parker vietnam JAK Series, the air kncker cylinder, is a pneumatic piston type knocker (Shocker) generator.

Parker vietnam Compact Pneumatic Cylinders, Cartridge Style - P1G Series / Parker Pneumatic - Europe

Parker vietnam The P1G actuator in bore sizes Ø6 to Ø16mm is a single cylinder for standard temperature -20 ° C to + 80 ° C. A nickel plated brass. Suitable for light duty applications.

Parker vietnam Magnetically Coupled Rodless Cylinder- P1ZS / P1ZG / P1ZT

Parker vietnam Tube size 16 to 40 mm, space saving. Magnetic transit design. Magnetic force transits the movement with piston side magnet and silder magnet. Stainless tube, light weighted and durable.

Parker vietnam P5TA9 - Short Stroke Thruster Twin Guided Cylinder

Parker vietnam Parker P5TA Series, short stroke thruster, twin guided cylinder, has high accuracy and high stiffness of positioning. In ad***ion, its compact and robust design gurantees long service life and low maintanance cost.


Parker vietnam ISO Pneumatic Cylinders, Large Bore Tie Rod Design - P1D-T Series / Parker Pneumatic - Europe

Parker vietnam The P1D-T actuator in bore sizes Ø32 to Ø125mm is an ISO 15552 / VDMA magnetic tie rod for standard temperature -20 ° C to + 80 ° C with a corrosion resistant metal body. Strokes up to 2800mm.

Parker vietnam ROD LOCK FOR NC9 AND PA-2 SERIES PNEUMATIC CYLINDERS

Parker vietnam P1D-BT Series Tie Rod Cylinder

Parker vietnam The P1D-BT Series cylinder is extention from P1D-B and the version with tie rod. P1D-BT series meets the specifications in the ISO 15552 standard. This means of full interchangeability to any ISO 15552 cylinder anywhere around the globe.

Parker vietnam Pneumatic Guided Cylinder Slide - P5E Series

Parker vietnam P5E is a low profile, light weight, standard duty guided assembly, powered by ISO cylinders. The maximum operating pressure is 145 psi. Bore sizes are 32, 40, 50, 63, 80 & 100mm. Rod lock & oversize rod options are available.

Parker vietnam Pneumatic Round Body Cylinder - P1L Series

Parker vietnam The P1L Series is a round-body repairable cylinder. The P1L's versatile mounting features and rugged bearing system for applications where NFPA cylinders may be too long and where low profile cylinders may provide inadequate bearing support.

Parker vietnam Pneumatic Non-Rotating Piston Rod Cylinder - 2MNR

Parker vietnam The 2MNR cylinder is ruggedly designed with a non-rotating piston design. The aluminum body and end caps make the 2MNR a light weight solution. With 6 bore sizes, 10 NFPA mounting styles, and a variety of options, the 2MNR is easily adaptable.

Parker vietnam Pneumatic NFPA Cylinder - 3MA Series (Obsolete)

Parker vietnam The 3MA is a configurable, general purpose cylinder. The aluminum body and die casting. With 6 bore sizes, 18 NFPA mounting styles, and a variety of options. The 3MA is adaptable to many applications.

Parker vietnam Pneumatic NFPA Cylinder - 4MA Series

Parker vietnam The 4MA is a ruggedly constructed all purpose cylinder. The aluminum body and end caps make the 4MA a light weight solution. With 8 bore sizes, 20 NFPA mounting styles, and it's highly configurable and easily adaptable.

Parker vietnam Pneumatic Tie Rod Cylinder - C Series (Inch, Medium Duty)

Parker vietnam The C Series is a configurable general purpose legacy cylinder. The aluminum body and end caps. With 5 bore sizes, 7 mounting styles, and a variety of options, the C Series is adaptable to many app

Parker vietnam Pneumatic Guided Cylinder Slide - HBB Series

Parker vietnam HBB is a base slide for heavy duty linear support NFPA or ISO cylinders. The maximum operating pressure is 250 psi (air), or 750 psi (oil). Bore sizes are 40, 50 & 63mm (1.5, 2, 2.5 ") Rod lock & oversize rod options are available.



Parker vietnam Pneumatic Guided Cylinder Slide - HBC Ser



Để biết thêm chi tiết thông tin và tư vấn miễn phí với giá cả hợp lý hãy gọi cho chúng tôi.


Huỳnh Thanh Giàu

[Technical Support & Senior Sales Eng ]

[Cellphone] +84 938 906 663

[Email ] giau@hgpvietnam.com

Online contact :

Skype: Mr Giàu.hgpvietnam